Inlaid Pearl Double-Layered Titanium Steel Necklace | 100500340851532
100500340851532
Pieces: 1-piece Material: Synthetic pearl, 18K gold-plated, Titanium steel Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time. Imported Product measurements:One Size:Chain length 17.7 in, Extension chain length 2...
- Pieces: 1-piece
- Material: Synthetic pearl, 18K gold-plated, Titanium steel
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:
One Size:Chain length 17.7 in, Extension chain length 2 in, Weight 1 oz (29 g)
Inlaid Pearl Double-Layered Titanium Steel Necklace
How to Measure
Use this quick guide to choose lengths that sit exactly where you want each layer to fall.
- Measure with a soft tape (or string + ruler). Wrap it where you want the top layer to sit (base of neck for a choker look, or just below for a collarbone fit). Note the length in cm.
- For the second layer, add 5–7 cm to your top-layer length for a clean staggered look that avoids tangling.
- If the design includes a drop or pendant, add the pendant/drop length to the chain length to estimate where the lowest point will fall.
- Measuring an existing necklace: lay it flat, close the clasp, and measure end-to-end (do not include any pendant in the chain length).
- Extender chains: if the necklace includes an extender, the shortest fit is “chain length,” the longest fit is “chain length + extender.”
- Quick conversions: choker ~35–38 cm, collarbone/princess ~40–45 cm, mid-chest/matinee ~50–55 cm. 1 inch = 2.54 cm.
Fit guide by neck circumference (approx.):
- 30–32 cm neck: top 38–40 cm; second 45–48 cm
- 33–35 cm neck: top 40–42 cm; second 47–50 cm
- 36–38 cm neck: top 42–45 cm; second 50–53 cm
Note: Lengths above are general guidance. If your product page lists specific lengths, use those as your primary reference.
Materials & Composition
Titanium Steel (316L Stainless Steel)
- Durable and corrosion-resistant alloy commonly used in jewelry for everyday wear.
- Hypoallergenic for most wearers; formulated with very low nickel release compared with standard alloys.
- Resists tarnish, sweat, and water exposure better than many base metals; won’t easily rust or discolor.
- Holds shine with minimal upkeep; suitable for both polished and brushed finishes.
Pearl Inlay
- Lustrous pearl accent set into the metal for a smooth, refined profile.
- Pearls (cultured or shell/engineered, depending on the specific style) naturally show subtle variations in color, surface, and shape—these are part of their charm.
- Pearls are organic and softer than metal; they prefer gentle handling and avoid harsh chemicals.
Finish & Plating
- Silver-tone: natural steel finish; Gold-tone: typically PVD/ion plating for enhanced color retention.
- PVD/ion plating is more wear-resistant than standard electroplating, but abrasive contact can still shorten its life.
If your item’s listing specifies a particular pearl type or finish (e.g., freshwater pearl, mother-of-pearl, 18K PVD), refer to those exact details.
Model & Fit Information
- Typical styled look: top layer sits at the base of the neck (choker/collarbone), second layer falls ~5–7 cm lower for a gentle cascade.
- To replicate a common on-body proportion, select a top layer around 38–42 cm and a second layer 5–7 cm longer; adjust using the extender for fine-tuning.
- Drape can vary with neck circumference, posture, and neckline. Use the measurement guide above for the closest match to your preferred look.
Model-specific measurements may vary by photoshoot. Use the lengths above to visualize a similar fit on yourself.
Care Guide (to keep it lovely longer)
- Last on, first off: put the necklace on after skincare, perfume, and hairspray to protect the pearl and finish.
- Wipe after wear with a soft, lint-free cloth—especially around the pearl and clasp—to remove sweat and oils.
- Avoid direct contact with chemicals (perfume, chlorine, cleaning agents) and high-heat environments (sauna, hot tub).
- Shower-safe for steel alone, but for plated finishes and pearls, remove before swimming, bathing, or vigorous workouts.
- Storage: keep in a soft pouch or compartment, away from hard pieces to prevent scratches; do not store pearls airtight for long periods.
- Cleaning: rinse titanium steel gently with lukewarm water and mild soap; dry thoroughly. Do not use ultrasonic or harsh cleaners on pearls.
- If plating shows wear over time, a jeweler can re-plate; light surface marks on steel can often be polished.
Style Tips
- Everyday elegance: pair with tees, button-downs, or knitwear; let the pearl layer sit at the collarbone for subtle polish.
- Necklines: v-neck and scoop neck highlight the tiered effect; with higher necklines, wear shorter on the extender for a choker-led stack.
- Layering: add a slim, longer chain (5–10 cm below the second layer) or a delicate choker above for a three-tier look without crowding the pearl.
- Metal match: coordinate with similar-tone earrings or a minimalist cuff; mixing metals works if the pearl is the focal point.
- Occasion: switch from daytime to evening by shortening the top layer for a dressier silhouette and pairing with pearl studs.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.