Gold-Plated Stainless Steel Star Ring | 100500986591526
100500986591526
Pieces: 1-piece Material: 18K gold-plated, Stainless steel Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time. Imported Product measurements:One Size:Actual Length 0.7 in, Weight 0.1 oz (2.62 g) Gold-Plated...
- Pieces: 1-piece
- Material: 18K gold-plated, Stainless steel
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:
One Size:Actual Length 0.7 in, Weight 0.1 oz (2.62 g)
Gold-Plated Stainless Steel Star Ring
Minimal, celestial-inspired ring crafted from stainless steel with a gold-plated finish and a raised star motif — ideal for everyday wear or stacking with other delicate bands.
How to measure
Two simple ways to get the correct size: measure an existing ring that fits, or measure your finger directly. Measure twice and at the end of the day when fingers are warm.
Method A — Measure an existing ring (recommended)
- Choose a ring that fits the intended finger comfortably.
- Measure the inner diameter: place the ring on a ruler or caliper and measure the widest inside distance from edge to edge in millimetres (mm).
- Use the conversion table below (US size / inner diameter / inner circumference) to find the closest size.
- If the ring measures between two sizes, pick the larger size for comfort (especially for wider bands).
Method B — Measure your finger circumference
- Wrap a thin strip of paper or non-stretchy string around the base of the finger where the ring will sit.
- Mark where the paper/string overlaps, then measure that length with a ruler in millimetres — that is the inner circumference.
- Match the measured circumference to the table below (EU size ≈ circumference in mm) to find the US size.
- If your knuckle is much larger than the base of your finger, measure both and choose a size between the two measurements or a slightly larger size so the ring can pass the knuckle.
Tip: For wide bands, consider sizing up half a size for comfort.
Ring size quick chart (common sizes)
| US Size | Inner Diameter (mm) | Inner Circumference (mm, approx) | EU (≈ circumference in mm) |
|---|---|---|---|
| 3 | 14.1 | 44.3 | 44 |
| 3.5 | 14.5 | 45.6 | 46 |
| 4 | 14.9 | 46.8 | 47 |
| 4.5 | 15.3 | 48.1 | 48 |
| 5 | 15.7 | 49.3 | 49 |
| 5.5 | 16.1 | 50.6 | 51 |
| 6 | 16.5 | 51.8 | 52 |
| 6.5 | 16.9 | 53.1 | 53 |
| 7 | 17.3 | 54.4 | 54 |
| 7.5 | 17.7 | 55.6 | 56 |
| 8 | 18.1 | 56.9 | 57 |
| 8.5 | 18.5 | 58.1 | 58 |
| 9 | 18.9 | 59.4 | 59 |
| 9.5 | 19.3 | 60.6 | 61 |
| 10 | 19.7 | 61.9 | 62 |
| 10.5 | 20.1 | 63.1 | 63 |
| 11 | 20.5 | 64.4 | 64 |
| 11.5 | 20.9 | 65.7 | 66 |
| 12 | 21.3 | 66.9 | 67 |
| 12.5 | 21.7 | 68.2 | 68 |
| 13 | 22.1 | 69.4 | 69 |
Materials
- Base metal
- Stainless steel (commonly 316L grade) — corrosion-resistant, strong, and low-maintenance. It holds shape well and resists tarnish compared with softer base metals.
- Gold finish
- Gold-plated finish applied over stainless steel. Plating methods vary (electroplating or PVD) and affect longevity — PVD coatings are generally more durable. Plating thickness and gold karat (e.g., 14K/18K tone) depend on the maker; plating will naturally wear over time with daily use.
- Hypoallergenic notes
- Many stainless-steel jewelry pieces are low in reactive metals and are tolerated by sensitive skin, but individual reactions vary. If you have a severe metal allergy, confirm the exact alloy and plating method or consider solid precious metals.
Model details
- Design: polished gold-plated band with a raised star motif centered on the top.
- Band width: typically 1.5–3 mm (may vary by size).
- Star motif diameter: typically 6–10 mm (depending on model variations).
- Finish: high-polish gold tone; may be available in multiple karat tones depending on supplier.
- Fit: true to size for narrow bands; for wider band variants, consider sizing up half a size.
Care guide — keep it lovely longer
- Avoid prolonged contact with water, chlorinated pools, hot tubs and salt water — these can accelerate plating wear.
- Remove before showering, exercising, sleeping and applying lotions, perfumes or cosmetics.
- Clean gently with warm water and a drop of mild dish soap; use a soft cloth or brush, rinse and dry thoroughly. Buff with a soft microfiber or jewelry polishing cloth to restore shine.
- Avoid abrasive cleaners, silver dips, bleach, acetone or alcohol-based cleaners — they can remove plating or scratch stainless steel.
- Do not use ultrasonic or steam cleaners on plated pieces unless manufacturer explicitly permits it.
- Store separately in a soft pouch or a lined jewelry box and, when possible, keep in a low-humidity environment (zip-top bag with a small silica packet helps) to limit tarnish and abrasion.
- If plating thins over time, a jeweler can re-plate the piece to refresh the finish.
Style tips
- Stack it: pair this delicate star ring with thin bands (plain or textured) for a layered, personalized look.
- Mix metals: the gold tone works well with rose gold or yellow gold pieces; mix in a slim silver/steel band for a modern contrast.
- Finger placement: wear it on the ring or middle finger as a subtle statement, or use it as a midi ring on the index or pinky for a playful touch.
- Coordinate jewelry: match with a small star pendant or moon-themed earrings for a cohesive celestial set.
- Day-to-night: keep styling simple for daytime (stacked thin bands) and add a bolder cuff or layered necklaces for evening.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.