Titanium Steel Pendant Necklace | Gold / One Size 100500753341907
- Pieces: 1-piece
- Material: 18K gold-plated, Titanium steel
- Care instructions:
1. Use a soft cloth to wipe. After each wear, you can use a soft cloth to wipe.
2. Avoid contact with water, as prolonged exposure to moisture can cause discoloration.
3. Store properly. If not wearing the jewelry for a long time, it is recommended to store it properly to avoid prolonged exposure to air, which can cause oxidation., Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:
One Size
Style A: Chain length 15.7 in, Extension chain length 2 in, Weight 0.2 oz (6 g)
Style B: Chain length 19.7 in, Extension chain length 2 in, Weight 0.2 oz (6 g)
How to Measure Your Pendant Necklace
Use the guide below to choose the right length and confirm compatibility with your wardrobe and other chains.
- Chain length
- Measure a necklace you already like end‑to‑end (including clasp) with a soft tape or ruler.
- No reference necklace? Wrap a string around your neck to the desired drop, mark it, then measure the string.
- Reference points:
- 16 in (40 cm): close to the base of the neck
- 18 in (45 cm): at the collarbone on most
- 20 in (50 cm): just below the collarbone
- 22–24 in (55–60 cm): mid‑chest
- Pendant size
- Height: measure from the top of the bail loop to the bottom tip; some shops list height without the bail—check product notes.
- Width: widest point of the pendant.
- Thickness: side profile of the pendant at the thickest area.
- Bail opening (inner diameter)
- Measure the inner height and width of the bail loop.
- Ensure the inner width is at least the chain’s thickness + 0.5 mm to pass through comfortably.
- Chain thickness
- Measure in millimeters (e.g., 2–3 mm for subtle, 3–5 mm for chunkier looks).
- Match pendant scale to chain thickness for a balanced look.
- Fit formula
- Snug fit: neck circumference + ~2 in (5 cm).
- Relaxed fit: neck circumference + ~4 in (10 cm).
Materials: About Titanium Steel
Titanium steel is a trade term commonly used in jewelry for high‑grade stainless steel alloys sometimes combined with a titanium finish or elements. It’s chosen for everyday wear because it is strong, low‑maintenance, and resists discoloration.
- Durability: Highly resistant to scratches compared with softer precious metals.
- Corrosion resistance: Resists rust and tarnish from everyday moisture and sweat.
- Color stability: Often finished with PVD (physical vapor deposition) for long‑lasting color and sheen.
- Skin comfort: Generally well‑tolerated by most wearers. If you have known metal sensitivities, verify the specific alloy and plating details before extended wear.
- Low maintenance: Cleans easily with mild soap and water; no frequent polishing needed.
Model & Fit Guide
Use these on‑body references when viewing photos or choosing your length:
- 16 in (40 cm): Sits high at the base of the neck; great with open collars and crew necks for a minimal look.
- 18 in (45 cm): Rests at the collarbone on most; the most versatile everyday length.
- 20 in (50 cm): Falls just below the collarbone; ideal for medium pendants or layering.
- 22–24 in (55–60 cm): Mid‑chest drop; pairs well over tees and under sweatshirts.
Tip: For a medium pendant (about 20–30 mm tall), many choose 18–22 in depending on neck size and desired drop. If product photos show a model, check the caption for the exact chain length worn.
Care Guide (to keep it lovely longer)
- Daily care: Wipe with a soft, dry microfiber cloth after wear to remove skin oils.
- Washing: If needed, rinse with lukewarm water and mild soap; pat completely dry.
- Avoid: Harsh chemicals (bleach, chlorine, ammonia), strong perfumes directly on the metal, and abrasive scrubbing pads.
- Water: Titanium steel tolerates water well, but rinse and dry after saltwater or chlorinated pools to preserve any surface finish.
- Storage: Keep in a soft pouch or individual compartment to prevent scuffs; fasten the clasp and lay chains flat to avoid tangling.
- Color finishes: If your piece has a colored/PVD finish, minimize friction with other jewelry and hard surfaces to keep the color pristine.
- Checkups: Periodically inspect the bail, jump rings, and clasp; tighten or replace if they become loose.
Style Tips
- Everyday minimal: Wear the pendant solo on an 18–20 in chain with a tee or button‑down.
- Layered look: Mix chain textures and lengths with 2–4 in spacing (e.g., 18 in + 20 in + 24 in).
- Necklines:
- Crew neck: 18–20 in so the pendant sits just below the collar.
- V‑neck: Choose a length that places the pendant within the V for balance.
- Turtleneck: 22–24 in for a clean drop over the knit.
- Match metals: Titanium steel’s cool tone pairs seamlessly with stainless, platinum‑tone, or white‑gold pieces.
- Balance scale: Pair small pendants with finer chains; choose thicker chains for bold pendants.
- Finish mix: Contrast a polished chain with a brushed pendant (or vice versa) for dimension without clashing.
- Signature stack: Combine with a simple band ring or cuff in a similar finish for a cohesive look.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.