Titanium Steel Beaded Necklace | Gold / One Size 100500301981205
- Pieces: 1-piece
- Material: 18K gold-plated, Titanium steel
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
Product Measurements (Measurements by inches) & Size Conversion
| Size | Extension chain length | Chain length |
|---|---|---|
| One Size | 2 | 15.7 |
Titanium Steel Beaded Necklace
Materials & Composition
This piece is crafted from high-grade “titanium steel,” a trade term commonly used in jewelry to describe 316L stainless steel or stainless steel with a titanium-based color coating. It’s built for everyday wear and designed to keep its polish and color with minimal upkeep.
- Base metal: 316L stainless steel (often marketed as “titanium steel”).
- Finish: Natural steel tone or durable PVD color coating (if applicable).
- Properties: Corrosion-resistant, water- and sweat-resistant, hard-wearing, and tarnish-resistant.
- Skin-friendly: 316L is engineered for low nickel release and is widely used in jewelry for sensitive skin.
Notes:
• PVD (Physical Vapor Deposition) coatings are more durable than traditional electroplating and better resist everyday wear.
• Stainless steel may be weakly magnetic—this is normal and not an indicator of quality.
• Exact alloying and finish details can vary by batch and color; always refer to the variant options in this listing.
How to Measure
- Measure your neck:
Wrap a soft measuring tape around the base of your neck where the necklace will sit. Note the measurement.
No tape? Use a string, mark it, then measure the string against a ruler. - Choose your length:
- Close choker fit: neck measurement + 0.5–1 in (1–2.5 cm).
- Classic everyday fit: neck measurement + 1.5–2 in (4–5 cm).
- Layering: select subsequent necklaces 2 in (5 cm) longer than the previous.
- Consider bead size:
Larger beads reduce the inner circumference slightly and sit higher on the neck. For 6 mm+ beads, consider sizing up by ~0.5–1 in (1–2.5 cm) compared to a flat chain. - Extenders (if included):
An extender adds flexibility. For example, a 16 in necklace with a 2 in extender can be worn from 16–18 in.
Quick length guide on an average neck (about 14 in / 35.5 cm):
• 14–15 in: high choker • 16 in: at the base of the neck • 18 in: at the collarbone • 20–22 in: just below the collarbone • 24+ in: long/laying length
Bead size at a glance (diameter):
• 3–4 mm: delicate • 5–6 mm: classic/medium • 7–8 mm: bold statement
Model Information & Fit Reference
Model appearance can vary by photo setup, camera angle, and bead size. Use these general cues to match the look:
- Seen as a choker at the base of the neck: typically 14–16 in (35–40 cm).
- Seen resting at the collarbone: typically 17–18 in (43–46 cm).
- Seen below the collarbone: typically 20–22 in (51–56 cm).
Fit tips by neck circumference:
• 12–13.5 in (30.5–34 cm): choker 14–15 in; everyday 16–17 in
• 14–15.5 in (35.5–39.5 cm): choker 15–16 in; everyday 17–18 in
• 16–17.5 in (40.5–44.5 cm): choker 16–17 in; everyday 18–20 in
Care Guide (to keep it lovely longer)
- Daily care: Wipe with a soft, dry cloth after wear to remove skin oils and sweat.
- Cleaning: Use mild soap and lukewarm water; rinse and dry thoroughly. Avoid abrasive pads and harsh polishes.
- Water & sweat: Stainless steel is water-resistant, but rinse and dry after saltwater, pool, or intense workouts to preserve the finish.
- Chemicals: Avoid contact with perfume, hairspray, lotions, bleach, and cleaning agents. Put jewelry on last and take off first.
- Storage: Keep dry and separate from other pieces to prevent scratches. Use a pouch or box; add a silica pouch in humid climates.
- Coated finishes: If your necklace has a PVD color (e.g., gold/black), avoid ultrasonic cleaners and compound polishes to protect the coating.
- Activity: Remove before heavy lifting or impact sports to prevent dents or deformation.
- Resizing: Stainless steel cannot be easily resized. Use extenders for flexibility if you’re between lengths.
Style Tips
- Minimalist: Wear solo over a tee or slip dress for a clean, modern look.
- Layered: Mix lengths (e.g., 16/18/20 in) and textures—pair beads with a flat herringbone or a simple cable chain.
- Mixed metals: Steel complements both silver and gold tones; use a gold-tone PVD piece to bridge mixed-metal stacks.
- Smart casual: Let it peek from an open-collar shirt or blazer for subtle polish.
- Statement: Choose 6–8 mm beads for boldness; keep other accessories minimal.
- All-season: Durable steel works year-round—sweat-friendly in summer, snag-resistant under knits in winter.
- Unisex: A versatile choice for any wardrobe—adjust length for choker, collarbone, or long-line looks.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.