Round Toe Flats Athletic | Gray / 36(US5) 100600526131035
100600526131035
Fit: True to size, order usual size. Includes: Box not included Heel height: Flats Material: Mesh, Rubber Imported Product Measurements (Measurements by inches) & Size Conversion Size Foot length 36(US5) 9 37(US6) 9.2 38(US7) 9.4 39(US8) 9.6 40(US9) 9.8 41(US10) 10 Round Toe Flats Athletic A low‑profile, round‑toe flat that...
Categories:
- Fit: True to size, order usual size.
- Includes: Box not included
- Heel height: Flats
- Material: Mesh, Rubber
- Imported
Product Measurements (Measurements by inches) & Size Conversion
| Size | Foot length |
|---|---|
| 36(US5) | 9 |
| 37(US6) | 9.2 |
| 38(US7) | 9.4 |
| 39(US8) | 9.6 |
| 40(US9) | 9.8 |
| 41(US10) | 10 |
Round Toe Flats Athletic
A low‑profile, round‑toe flat that blends the look of classic flats with athletic comfort—flexible sole, cushioned footbed and a silhouette built for all‑day wear.
How to measure
Tools you’ll need: a sheet of paper, a pen or pencil, a ruler or tape measure, a flat floor surface, and the socks you plan to wear with the flats.
Measure your foot (best method)
- Place the paper on a hard floor and stand on it with your full weight evenly distributed.
- Trace the outline of your foot keeping the pen vertical. Mark the very back of the heel and the tip of the longest toe.
- Measure the distance between these two marks. Record the length in both centimetres (cm) and inches (in). (1 in = 2.54 cm.)
- Repeat for the other foot and use the larger measurement when choosing size.
- To measure width: mark the widest points at the ball of your foot on the outline and measure across. Alternatively use a flexible tape to measure circumference across the ball of the foot.
Measure the product (shoe) to compare
- Remove the insole if possible and lay it flat on paper. Mark and measure insole length (heel to toe) and widest point (ball area).
- If the insole is not removable, measure inside the shoe from heel to where the toe box begins to curve up, or measure the outsole length and subtract ~0.5–1.0 cm for internal clearance.
- Measure heel height (floor to top of heel counter) and forefoot sole thickness if those specs matter to you.
- Weigh a single shoe on a kitchen scale if you need the weight for packing or shipping (approximate range for flats: 150–300 g per shoe depending on size and materials).
How to use your measurements
- Allow 5–10 mm (0.2–0.4 in) of extra toe room for a snug flat. Narrow fits may need less; if you prefer more space or have long toes choose the higher end.
- Compare your foot length + desired toe room to the measured insole length. If insole length ≥ (foot length + 5–10 mm) the fit should be comfortable.
- Check width: if your foot width exceeds the measured shoe width, look for a wide option or size up.
- Always cross‑check with the brand’s size chart—brands vary. When in doubt, contact the seller with your foot measurements for the best recommendation.
Materials
Below are the common materials used in athletic‑style round toe flats and what to expect from each. Exact materials for a specific pair are listed on the product page or inside the shoe tag—always check that first.
- Upper
- Knit / Engineered mesh: breathable, flexible, lightweight. Often machine‑washable on a gentle cycle (only if the product page confirms). Care: spot‑clean or hand‑wash; air‑dry.
- Microfiber / Synthetic leather: durable, water‑resistant, easy to wipe clean. Care: wipe with a damp cloth and mild soap; avoid soaking and high heat.
- Natural leather: long‑lasting, molds to the foot. Care: clean with a damp cloth, use leather cleaner/conditioner, avoid submersion.
- Suede / Nubuck: soft nap with a premium look. Care: use a suede brush/eraser and a protective spray; avoid heavy water exposure.
- Lining
- Moisture‑wicking textile or mesh for breathability and odor control. Care: allow to air out after wear; remove and hand‑wash insoles if applicable.
- Insole
- EVA, memory foam or cushioned removable footbeds are common. Care: remove and hand‑wash with mild soap; air dry completely before reinserting.
- Midsole / Outsole
- EVA foam, TPR or rubber for lightweight cushioning and traction. Care: wipe clean; use a brush for stuck dirt in grooves.
How to confirm exact materials: check the product description, look at the inside tag or box, request material/spec details from customer service, or review close‑up product photos that show texture. If a pair is labeled “vegan” it will use synthetic alternatives instead of leather.
Model information
Round Toe Flats Athletic is designed as an everyday performance‑inspired flat: a rounded toe box for natural toe spread, a flexible athletic sole for easy walking and a cushioned footbed for comfort during long wear.
- Silhouette: round toe, low profile, slip‑on or elastic‑gore entry (depending on version).
- Fit: generally true to size for standard widths. If you have wide feet, consider a half size up or a wide fit model.
- Cushion & support: padded insole with flexible midsole—suitable for all-day walking but not intended as a medical orthotic unless an orthotic-friendly/removable insole is provided.
- Use cases: daily commuting, travel, casual office, light walking and errands.
- Break‑in: minimal for knit or synthetic uppers; leather versions may need a few wears to soften and conform to your foot.
Care Guide (to keep it lovely longer)
Everyday care
- Wipe dirt and dust off after each wear with a soft cloth or brush.
- Air shoes out for at least a few hours between wears to reduce moisture and odor.
- Use no‑show socks or breathable liners to minimize sweat and friction inside the shoe.
Cleaning by material
- Knit / mesh: Spot clean with mild soap and water. If manufacturer allows, place in a mesh laundry bag and wash on a gentle, cool cycle; always air dry and reshape.
- Synthetic leather / microfiber: Wipe with a damp cloth and a drop of mild soap. Dry away from direct heat.
- Leather: Wipe clean, use leather cleaner as needed and follow with conditioner. Avoid soaking and prolonged sun exposure.
- Suede / nubuck: Brush with a suede brush, use a suede eraser for marks, protect with a waterproofing spray before first wear.
- Insoles: Remove if possible and hand‑wash with mild soap. Air dry completely before reinserting.
Drying and storage
- Air dry shoes naturally; do not use a clothes dryer or place near direct heat (radiators, direct sunlight) which can warp materials and glue.
- Stuff toes with paper or use shoe trees to maintain shape while drying or storing.
- Store in a cool, dry place in a breathable bag or box; avoid plastic for long‑term storage to prevent moisture buildup.
Quick fixes & tips
- For salt stains: mix equal parts water and white vinegar, dab gently, then wipe and air dry.
- For grease stains on fabric: sprinkle cornstarch or talc, let sit to absorb, then brush away and spot clean.
- Scuffs on synthetic leather: gently rub with a soft cloth and a small amount of non‑abrasive cleaner.
- If the sole separates or wears significantly, consult a cobbler for resoling or repair rather than replacing immediately.
Dos & Don'ts
- Do rotate pairs—wearing the same shoes every day shortens their life.
- Do use a protective spray suitable for the upper material before first wear.
- Don't machine‑dry or soak leather and suede.
- Don't use bleach or harsh chemicals on colored fabrics or leathers.
Style Tips
General advice
- Round toe flats with an athletic sole read casual yet refined—pair them with structured or relaxed pieces depending on the look you want.
- Keep proportions in mind: cropped trousers or ankle‑length pants showcase the shoe; longer hems work best when the hem is slim or tapered.
Outfit pairings
- Casual weekend: cuffed jeans, a simple tee and a lightweight bomber or denim jacket. No‑show socks keep the silhouette clean.
- Office smart‑casual: cropped tailored trousers or a midi skirt with a blouse and lightweight blazer—choose a neutral flat for polish.
- Travel-friendly: leggings or joggers, breathable tee and a layering cardigan. Choose a padded insole or add a removable liner for long days.
- Summer: linen shorts or a sundress—metallic or neutral flats can elevate a simple outfit.
- Athleisure: tapered joggers, fitted top and a sporty jacket—flats with a cushioned sole keep the look athletic but refined.
Socks, liners & fit tweaks
- No‑show socks maintain a barefoot look while preventing friction and odor.
- Thin cushioned liners add comfort without changing fit much; thicker insoles will reduce internal length so size up if using them.
- Silicone heel grips or moleskin can prevent heel slip and reduce break‑in blisters.
Final tip: Neutral tones (black, tan, navy) are most versatile; bold or metallic colors serve as a focal point for a minimal outfit.
| Type: | |
|---|---|
| Vendor: | |
| Color: |
Gray, Khaki |
| Size: |
36(US5), 37(US6), 38(US7), 39(US8), 40(US9), 41(US10) |
| SKU: |
100600526131035 |
| Weight: |
302 g |
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.