Beaded Titanium Steel Double-Layered Necklace | 100500884331669
100500884331669
Pieces: 1-piece Material: 18K gold-plated, Titanium steel, Crystal Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time. Imported Product measurements:One Size:Chain length 15.7 in, Extension chain length 2 in,...
- Pieces: 1-piece
- Material: 18K gold-plated, Titanium steel, Crystal
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:
One Size:Chain length 15.7 in, Extension chain length 2 in, Weight 0.2 oz (5 g)
How to Measure
Confirm the fit and layered drop before you buy. You can measure both your neck and a necklace you already own.
- Measure your neck:
- Wrap a soft tape (or a string you later measure with a ruler) around the base of your neck where a choker sits.
- Note this number as your neck circumference.
- Choose layer lengths:
- Short layer (choker): neck size + 2–4 cm (about +1–1.5 in) for a close fit; +5–7 cm (+2–3 in) for a relaxed fit.
- Long layer (princess/collarbone): short layer + 4–6 cm (+1.5–2.5 in) to keep the layers separate and reduce tangling.
- If there is an extender chain:
- Add the extender range to the base length. Example: 40 cm + 5 cm extender = 40–45 cm (16–18 in).
- Measure an existing necklace:
- Lay it flat and measure end-to-end including the clasp. For double-layer pieces, measure each strand separately.
- Estimate where it will sit:
- Drop length is roughly half the total length. Choker sits at the base of the neck; princess length generally lands at the collarbone.
Quick reference: choker 35–40 cm (14–16 in); princess/collarbone 43–50 cm (17–20 in). Adjust to taste and neck anatomy.
Materials & Quality
- Titanium steel (high-grade stainless steel, often 316L):
- Exceptionally durable; highly resistant to tarnish, corrosion, and everyday wear.
- Low nickel release and generally comfortable for sensitive skin.
- Holds shine with minimal upkeep and won’t turn skin green.
- Finish and color:
- Gold/black tones are typically applied with PVD/ion plating for longer-lasting color than standard electroplating.
- Silver tone is usually the natural steel finish (no color plating).
- Beaded accents:
- Smooth, non-porous beads selected for color and polish; depending on colorway, beads may be glass, stainless steel, acrylic, or stone.
- Beads add texture and dimension to the sleek steel chain for a balanced layered look.
- Hardware:
- Matching stainless/titanium-steel findings and clasp designed for daily wear and secure fastening.
Note: “Titanium steel” is a trade term commonly used for 316L stainless steel. It is not pure titanium, but offers excellent strength, shine, and corrosion resistance suitable for everyday jewelry.
Model Reference & Fit Notes
- The double-layer design is intended to show a clear gap between strands (about 4–6 cm / 1.5–2.5 in).
- On smaller necks (30–34 cm / 12–13.5 in), the short layer wears as a relaxed choker; on medium (35–38 cm / 13.75–15 in) it sits at the base of the neck; fuller necks (39+ cm / 15.5+ in) may prefer using more of the extender for comfort.
- For higher necklines or more drape, extend each layer by 2–4 cm (1–1.5 in).
On-model images are for styling guidance; exact drop depends on neck circumference and extender setting.
Care Guide (to keep it lovely longer)
- Wipe after wear with a soft, dry cloth to remove oils and sweat.
- Titanium steel is water-friendly and highly tarnish resistant; however, rinse with fresh water and dry after pools, salt water, or heavy workouts to maintain maximum shine.
- Avoid direct contact with perfume, hairspray, sunscreen, and harsh cleaners. Apply products first, then put on your necklace.
- Store unclasped and flat (or hang) to minimize tangles; use a soft pouch to prevent scratches.
- Travel tip: clasp the ends together and feed the necklace through a straw or wrap in a soft cloth to prevent knots.
- If a beaded strand loosens or thread becomes visible, pause wear and have it restrung to prevent bead loss.
Style Tips
- Set the short layer as a choker and the second at the collarbone for an effortless everyday stack.
- Mix textures: let the beaded strand contrast a smooth chain or a small pendant for dimension.
- Pair with necklines: adjust the extender so the lower layer sits just above a crew neck or frames a V-neck.
- Build a trio: add a third fine chain 2–3 cm (1 in) longer than the second layer for a fuller, tangle-conscious stack.
- Color play: match bead tones to your outfit or use them as a subtle pop against neutrals and denim.
- Finish the look with coordinating steel pieces—simple hoops, a cuff, or a minimalist ring—for a cohesive set.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.