1 Carat Moissanite Rhodium-Plated Side Stone Ring | Silver / 5 100100856905900
100100856905900
Style: Minimalist Appearance: Minimalist design Material: 925 sterling silver, moissanite, rhodium-plated, zircon (accent stones) Craft: Polished Care: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time. Imported Includes: A matching box.Moissanite...
- Style: Minimalist
- Appearance: Minimalist design
- Material: 925 sterling silver, moissanite, rhodium-plated, zircon (accent stones)
- Craft: Polished
- Care: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Includes:
A matching box.
Moissanite jewelry over 0.3 carats includes a certificate of stone properties. Limited warranty included, please contact us for any issues related to your purchase.
- Product measurements:
5: Circumference 2 in
6: Circumference 2.1 in
7: Circumference 2.2 in
8: Circumference 2.3 in
9: Circumference 2.4 in
10: Circumference 2.44 in
11: Circumference 2.51 in
Moissanite: 1 carat
Weight: 0.07 oz (2.2 g)
How to measure
Find the right ring size
- Use a ring sizer: the most accurate method is a purchased or jeweler’s ring sizer. Try several sizes and choose the most comfortable fit.
- Measure an existing ring: measure the inside diameter across the widest point with a ruler or digital calipers (in mm). Compare that measurement to a standard ring-size chart or bring it to a jeweler.
- String or paper method (quick home method): wrap a strip of paper or thread around the base of the finger, mark where it meets, measure the length in millimetres — this is the finger circumference. Use an online chart to convert circumference to a ring size.
- Timing & fit notes: measure at the end of the day when fingers are warm and largest. If your knuckle is larger than the base of your finger, measure both and choose a size between the two measurements. For wide bands, go up by about ½ size for comfort.
Measure the ring and stones (for returns, repairs or matching)
- Center stone diameter: use digital calipers to measure the widest point across the stone. (Reference: a 1 carat round brilliant moissanite is approximately 6.5 mm in diameter.)
- Side stones: measure each accent stone across its widest point or ask the seller for the exact mm sizing or total side-stone carat weight.
- Band width and thickness: measure across the top of the band to get the width (typical bands are 1.8–3.5 mm for delicate styles). Measure cross-section thickness if needed for comfort-fit or resizing considerations.
- If in doubt, ask the seller for the detailed spec sheet or a jeweler’s measurement — professionals use calipers and microscopes for exact results.
Materials — what this ring is made of
Key components and what they mean for appearance, durability and care:
- Center stone — Moissanite (1 carat)
- Chemistry and origin: moissanite is silicon carbide (SiC). Most moissanite used in jewelry today is lab-created, offering an ethical and consistent alternative to mined gemstones.
- Durability & optical properties: Mohs hardness ≈ 9.25; very durable for everyday wear. High refractive index and dispersion give exceptional brilliance and fire (often appears “more fiery” than diamond).
- Care note: extremely scratch resistant but should still be cleaned regularly to keep maximum sparkle.
- Side stones / accent stones
- Typically small round moissanite or other precision-cut accents. Exact size and number vary by design — consult the product spec for exact counts and mm sizes.
- Metal — Rhodium-plated finish
- Rhodium is a platinum-group metal used as a thin plating to create a bright white, highly reflective finish.
- Rhodium plating is commonly applied over sterling silver (925) or white gold. The listing should state the underlying base metal — check the product page if you need to confirm.
- Benefits: enhanced whiteness, scratch resistance and reduced tarnish. Limitations: plating is very thin and will gradually wear with everyday use; replating is a simple jeweler service to restore the finish.
Note: exact material specs (base metal, total side-stone carat weight, certification) should be confirmed on the product listing or product certificate supplied by the seller.
About this model
Design summary for the "1 Carat Moissanite Rhodium-Plated Side Stone Ring":
- Style: classic side-stone ring — 1 ct round brilliant center moissanite with smaller accent stones set into the shoulders for extra sparkle.
- Setting: prong setting for center stone to maximize light return; accent stones set along the band (pavé or bead-set variants are common).
- Finish: rhodium-plated bright-white finish for a platinum-like look.
- Approximate reference dimensions: center stone ≈ 6.5 mm (1 ct round); accent stones typically 1.2–2.5 mm each; band width commonly 2–3.5 mm. Exact measurements depend on the specific size and variation — see product specs for final values.
- Fit & sizing: available in standard ring sizes; comfort variations (rounded inner profile) may be used in some models — check the seller’s size & fit notes before ordering or resizing.
Care guide — keep it lovely longer
Daily wear & prevention
- Remove the ring when doing heavy manual work, exercising, swimming (chlorine) or using household chemicals. Chemicals and abrasion accelerate plating wear.
- Avoid spraying perfume, hairspray or lotions directly onto the ring — apply these products first and let them dry before putting the ring on.
- Try not to wear the ring while sleeping or doing repetitive hand tasks that could bump prongs or settings.
Cleaning at home
- Soak the ring in a bowl of warm water with a few drops of mild dish soap for 10–20 minutes.
- Gently brush around the stones and setting with a soft-bristle toothbrush to remove oils and debris.
- Rinse thoroughly in warm water and dry with a lint-free cloth. Inspect settings for loose stones — if you see any, stop wearing and have a jeweler inspect it.
Professional care & replating
- Rhodium plating will wear over time; when the metal beneath becomes visible or the finish dulls, ask a jeweler about rhodium replating. Frequency depends on wear — often between 1–3 years for everyday wear.
- A professional jeweler can also check and tighten settings and perform ultrasonic or steam cleaning if appropriate. Note: while moissanite tolerates ultrasonic cleaning, plating and delicate accent settings may not — follow your jeweler’s advice.
Storage
- Store the ring separately in a soft pouch or a lined jewelry box to prevent scratches to the moissanite and to minimize contact that can wear the plating.
- Avoid prolonged exposure to direct sunlight or high heat when storing to protect the finish.
Style tips
- For a cohesive look, pair this rhodium-plated ring with other white-metal pieces (white gold, platinum or rhodium-plated silver) — they visually match best.
- Wedding band pairing: choose a slim contoured or plain rhodium-plated band so the accent stones and center moissanite remain the focal point. A curved or notched band can sit flush against the ring’s shoulders.
- Stacking: keep stacked bands thinner (1.5–2 mm) to complement rather than overpower the center 1 ct stone. Mix texture (milgrain, plain, tiny diamonds/moissanite) for interest.
- Everyday vs. occasion styling: for everyday wear, pair with simple stud earrings or a delicate pendant; for evening or formal looks, add a matching moissanite tennis bracelet or drop earrings for high-impact sparkle.
- Nail & hand care: neutral or deep polish tones (nude, burgundy, navy) frame the ring nicely. Well-groomed hands enhance the overall presentation.
If you’d like recommendations for a complementary wedding band or matching jewelry pieces, check the product suggestions on the listing or ask customer service for coordinated options.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.