YMI Removable Faux Layered Multi-Pocket Jacket with Fuzzy Hood | Rust / S 100100909291366

YMI Removable Faux Layered Multi-Pocket Jacket with Fuzzy Hood

How to measure the jacket

Use a flexible cloth measuring tape and a flat, hard surface. Lay the jacket flat, zip/close it, and smooth out wrinkles without stretching the fabric. Measure seam-to-seam and double seam-to-seam results to get circumference measurements.

1. Chest / Bust — Measure across the front from one armhole seam to the other (seam-to-seam) about 1" (2.5 cm) below the armpit. Multiply that number by 2 to get the full chest circumference.
2. Shoulder width — Measure straight across the back from shoulder seam to shoulder seam.
3. Sleeve length — Two common methods:
   • From shoulder seam to end of cuff (recommended for sleeve construction).
   • Center back method: from center back at base of collar (CB) across to shoulder then down to cuff — use only if you use the same method for all jackets you list.
4. Back / Center length (CB) — Measure from the base of the collar seam (where the collar meets the body) straight down to the hem.
5. Front length / High point shoulder (HPS) — Measure from the high point of shoulder (where shoulder meets neck) down to hem if you list front length instead of CB.
6. Hem / Bottom width — Measure across the bottom hem seam (seam-to-seam) and double for circumference.
7. Hood depth & width — With the hood laid flat, measure from the seam where hood joins the neckline to the front edge for depth; measure seam-to-seam across the hood for width. If hood is removable, measure body without the hood for body fits.
8. Pocket opening & depth — Measure pocket mouth width and depth from opening to bottom seam if you list pocket dimensions.

Quick conversions: 1 inch = 2.54 cm. Always note which method you used (e.g., "sleeve from shoulder seam") so shoppers understand the measurements.

Materials (what to list and how to verify)

Exact fiber content varies by color and production run—always check the garment tag or product specification sheet for the authoritative fiber percentages. Typical materials for this style are:

• Shell / Outer fabric: polyester or a polyester blend (commonly 100% polyester or polyester/cotton blends).
• Lining: polyester taffeta or polyester knit (often 100% polyester).
• Fuzzy / Faux fur hood trim: synthetic pile such as polyester or acrylic (faux fur fibers are most often polyester/acrylic blends).
• Faux-layer panels (if present): knit blends — polyester/cotton/rayon combinations are common for the faux layered look.
• Fill / insulation (if quilted or insulated): polyester polyfill.
• Hardware: metal zippers/snaps or durable molded plastic components.

How to verify: refer to the sewn care label inside the jacket, the product data sheet, or the manufacturer’s product page for exact percentages and any special finishes (water-repellent coating, flame-retardant treatments, etc.).

Model information (example/template)

Provide clear model details to help customers judge fit. If you don't have exact measurements handy, use the following example template and replace with your real model data:

Model height

5'9" (175 cm) — example

Model is wearing

Size S (example)

Model measurements (example)

Bust 34" / Waist 25" / Hips 35" (86 / 64 / 89 cm)

Note: indicate whether the jacket fits true to size, runs small/large, or is intended as an oversized/relaxed fit so shoppers know whether to size up for layering.

Care guide (to keep it lovely longer)

Follow the garment’s care label first—these are general best practices for faux fur–trimmed outerwear:

• Detach removable parts: Remove the fuzzy hood or faux-fur trim (if removable) before washing. Treat the trim separately according to its care label.
• Pre-treat stains: Gently blot spills and pre-treat stains with a mild detergent solution; avoid aggressive rubbing.
• Machine wash (when permitted): Turn the jacket inside out, zip/fasten closures, and wash cold on a gentle cycle with mild liquid detergent. Wash similar colors together.
• Hand wash / spot clean faux fur: Faux fur trim is best spot cleaned or hand washed in cold water; rinse thoroughly and air dry. Do not use hot water on faux fur.
• Drying: Air dry on a flat surface or hang to dry. If tumble drying is allowed by the care label, use low heat and remove promptly. Avoid high heat which can damage synthetic fibers and faux fur.
• Restoring faux fur: After dry, gently shake and use a wide-tooth comb or soft brush to fluff the pile. Do not brush when wet.
• Ironing & steaming: Use low heat and a pressing cloth on outer shell fabrics; do not iron faux fur directly. A handheld steamer on low can help remove wrinkles—test on an inconspicuous area first.
• Storage: Hang on a broad-shouldered hanger to keep shape. Store in a cool, dry place away from direct sunlight. Use a breathable garment bag for long-term storage—avoid plastic bags that trap moisture.
• Professional care: For heavy soiling or stubborn stains, or if the care label recommends it, use a professional cleaner experienced with faux fur and synthetic outerwear.

Style tips

• Casual layered look: Wear over a chunky knit sweater, high-rise skinny jeans and ankle boots for everyday warmth and polish.
• Street-ready & sporty: Pair with leggings, a pullover hoodie and sneakers; keep the fuzzy hood attached for extra warmth and texture.
• Dress it up: Detach the hood to reveal the faux-layered neckline and pair with a midi skirt or tailored trousers and heeled boots for a smart-casual outfit.
• Add a belt: Cinch a wide belt over the jacket to create a defined waist and convert the relaxed silhouette into a more tailored look.
• Color play: Neutral jacket tones pair easily with bright scarves and accessories; use a pop of color at the neck (scarf or beanie) to lift the outfit.
• Travel-friendly: The removable hood makes this jacket versatile for changing weather—pack light layers underneath and use the jacket as an outer shell on the go.
• Accessory pairings: Crossbody bags, beanies, and leather or suede ankle boots complement the utilitarian pockets and textured faux fur.

Tip: Keep care instructions and the garment tag information in your product listing so customers can make informed choices and properly care for their jacket.