Titanium Steel Inlaid Zircon Embossed Ring | Gold / 6 100500275501286
- Pieces: 1-piece
- Material: Titanium steel, Zircon, Silver-plated, gold-plated
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:6: Circumference 2.1 in7: Circumference 2.2 in8: Circumference 2.3 in
Weight 0.2 oz (5.5 g)
How to measure this ring
When listing or buying a ring, include clear measurements so customers know fit and proportions. Measure at room temperature and at the end of the day (fingers are slightly larger then). If a knuckle is larger than the base of the finger, measure both and choose the larger size.
- Measure your finger (string/paper method)
- Wrap a thin strip of paper or a piece of string snugly around the base of the finger where the ring will sit.
- Mark where the string overlaps, then lay it flat and measure the marked length in millimetres (mm).
- The measured length = inner circumference (mm). To find inner diameter (mm): diameter = circumference ÷ π (≈ 3.1416).
- Match the circumference or diameter to the size chart below (approximate sizes) and pick the nearest size. If between sizes, choose the larger size.
- Measure an existing ring
- Use a caliper or ruler to measure the inner diameter across the widest inside points (in mm).
- Convert diameter to circumference (circumference = diameter × π) or match diameter directly to the size chart below.
- Band width & thickness
Use a caliper to measure:
- Width — measure the band from edge to edge across the top of the ring (typical for this style: 4–8 mm depending on model).
- Thickness — measure the cross‑section of the band from inner surface to outer surface (typical: 1.2–2.2 mm).
- Stone/inlay measurements
Measure the visible face of the inlaid zircon stones across the widest point (mm). For rows of stones, measure the length and number of stones; for single stones, state millimetre diameter and cut.
- Weight
Weigh on a jewellery scale and record in grams (g). Provide approximate weight by size (e.g., size 7 ≈ 6–9 g) if you can—note that weight varies by width and thickness.
Quick approximate ring-size chart (common sizes)
| US Size | Inside Diameter (mm) | Inside Circumference (mm) |
|---|---|---|
| 4 | 14.8 | 46.5 |
| 5 | 15.7 | 49.3 |
| 6 | 16.5 | 51.9 |
| 7 | 17.3 | 54.4 |
| 8 | 18.2 | 57.0 |
| 9 | 19.0 | 59.5 |
| 10 | 19.8 | 62.1 |
| 11 | 20.6 | 64.6 |
| 12 | 21.4 | 67.2 |
| 13 | 22.2 | 69.7 |
Note: the chart above is approximate. Always verify with actual product measurements for the most accurate fit.
Materials — what this ring is made of
- Titanium steel (base metal)
- Commonly marketed as "titanium steel," this style typically uses a durable stainless steel alloy (frequently 316L) or a steel base with a titanium‑based coating (PVD or ion plating) to achieve a titanium look and extra surface hardness. Typical properties:
- Very durable and corrosion‑resistant (good for daily wear).
- Often low‑maintenance and retains finish well; plating can wear over long periods depending on friction and exposure to chemicals.
- Generally low allergic reactions, but if you have severe nickel sensitivity you should confirm the exact alloy (pure titanium is the safest option for nickel allergy).
- Zircon inlay (stone)
- In jewellery listings the term "zircon" is frequently used for cubic zirconia (CZ), a lab‑made gem simulant with high brilliance that mimics diamond. If the listing actually uses natural zircon, its appearance and care can differ—check the product specifics. Common CZ characteristics:
- Bright, sparkly, and affordable; hardness ~8–8.5 on the Mohs scale.
- Durable for everyday wear but can be scratched by harder materials (e.g., diamond).
- Avoid exposing glued settings or inlays to strong solvents or ultrasonic cleaners unless the manufacturer confirms they are safe.
- Embossed finish
- The embossed texture/pattern is formed on the ring surface (either by stamping, engraving, or plating over a textured base). This creates a decorative profile that adds visual depth. Embossed details may catch dirt over time—clean gently between grooves.
If you need absolute confirmation of the metal grade, plating type, or whether the stones are natural zircon vs. cubic zirconia, include the manufacturer or SKU details in the product page so customers can verify.
Model information
Product name: Titanium Steel Inlaid Zircon Embossed Ring
- Style: Embossed patterned band with zircon inlay — modern/unisex design.
- Typical band width: 4–8 mm (state exact width per SKU).
- Typical thickness: 1.2–2.2 mm (state exact thickness per SKU).
- Available sizes: Generally US 4–13 (or custom sized per product listing) — list exact sizes you carry.
- Finish: Polished interior; embossed exterior with zircon inlay (state if matte or high polish).
- Weight: Varies by size and width (typical range ~4–12 g) — record measured weight per SKU.
- Packaging: Ship in protective jewellery box or pouch; include size and care card when possible.
Tip for sellers: display specific values (inner diameter, circumference, width, thickness and weight) for each model/SKU so buyers can compare accurately.
Care guide — keep it lovely longer
- Remove the ring before swimming, showering or contact with chlorinated pools and hot tubs — chlorine can speed surface wear or affect certain platings.
- Avoid exposure to household chemicals (bleach, detergents, solvents) and cosmetic products (perfume, lotion). Put the ring on after applying cosmetics.
- Clean gently with a soft, lint‑free cloth. For deeper cleaning use warm water, mild soap and a soft brush; rinse and dry thoroughly.
- If the ring has glued or set stones, avoid ultrasonic cleaners unless the manufacturer confirms they are safe.
- Store separately in a soft pouch or box to prevent surface scratches and reduce exposure to humidity.
- For plated surfaces: limit friction and abrasive polishing to prolong the finish. If plating thins over time it can be re‑plated by a professional.
- Inspect settings periodically; if stones are loose or an embossed element catches, take it to a jeweller for repair.
Following these steps will help maintain shine, keep the stones secure and extend the life of the finish.
Style tips
- Pair this embossed zircon inlay ring with a simple polished band on the opposite hand for contrast.
- For stackable looks choose complementary widths — a narrower plain band (2–4 mm) works well beside this style.
- Coordinate metals: the titanium/steel tone pairs well with black leather, dark woods, or cool‑tone accessories (silver, white gold).
- For a dressed‑up look, wear with a matching metal watch or cufflinks; for casual wear, keep other jewellery minimal to let the embossed detail stand out.
- Consider finger shape when choosing width: narrower bands lengthen shorter fingers; wider bands make longer fingers look proportionate.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.