• Features: Studded, Pocketed
• Stretch: No stretch
• Material composition: 75% cotton, 12.3% viscose, 12.7% polyester
• Care instructions: Machine wash cold. Tumble dry low.
• Imported

Product Measurements (Measurements by inches) & Size Conversion

Studded Acid Wash Long Sleeve Denim Jacket

How to measure

To choose the best size, measure a jacket that fits you well or take your body measurements. Use a soft tape measure and lay the jacket flat on a smooth surface. Measure straight across and, when noted, multiply the flat measurement by two to get the full circumference.

Measure a garment (recommended)

1. Lay the jacket flat, fasten the front, and smooth out wrinkles.
2. Chest / Bust: Measure from underarm seam to underarm seam across the front. Multiply by 2 for chest circumference.
3. Shoulder width: Measure across the back from one shoulder seam to the other.
4. Sleeve length: Measure from the shoulder seam to the end of the cuff. If a listing shows "center back sleeve," measure from the center back at the base of the neck to the cuff.
5. Back / Body length: Measure from the center back at the base of the neck straight down to the hem.
6. Hem width: Measure straight across the bottom hem and multiply by 2 for circumference.
7. Upper arm: Measure across the sleeve about 1" (2–3 cm) below the armhole and multiply by 2 for the sleeve-opening circumference.

Measure your body

• Chest: Measure the fullest part of your chest/bust with arms relaxed at your sides.
• Shoulder: Measure across the back from shoulder tip to shoulder tip.
• Sleeve: From center back at the base of the neck to the wrist (or from shoulder tip to wrist), depending on which measurement the product uses.
• Length: From the base of your neck to where you want the jacket hem to sit.

Sizing guidance

For a fitted look allow 0–2" (0–5 cm) of wearing ease in the chest. For a regular fit allow 2–4" (5–10 cm). For layering (sweater or hoodie underneath) allow 4–6" (10–15 cm).

Materials & construction

• Shell: Mid‑weight acid‑wash denim (typically cotton-based—check the garment label for exact fiber content).
• Trim & hardware: Metal studs, rivets and buttons; studs are decorative and securely attached. Some batches may use nickel‑free hardware—refer to the product label if you have metal sensitivities.
• Lining & thread: Most versions are unlined; reinforced stitching and polyester‑core thread are commonly used at stress points.
• Finish: Acid‑wash treatment produces unique variations in tone—slight color variation and fading are normal.

Note: Fabric blend and exact hardware composition can vary by color and production. Always check the sewn-in care/content label for the definitive material breakdown.

Model & fit details

Example model details for reference in product imagery:

• Height: 5'9" (175 cm)
• Bust: 32" (81 cm) • Waist: 24" (61 cm) • Hips: 35" (89 cm)
• Wearing size: Small (S) — shown for a relaxed, slightly boxy fit

Fit notes: This jacket has a classic trucker/boxy silhouette that sits at the hip. If you plan to layer chunky knits, consider sizing up; for a more fitted look, choose your usual size.

Care guide (to keep it lovely longer)

• Turn the jacket inside out and fasten buttons/snaps before washing to protect the acid wash and studs.
• Machine wash cold on a gentle cycle or hand wash with a mild detergent. Wash separately or with similar colors to prevent dye transfer.
• Avoid bleach, harsh chemicals and fabric softeners—these can damage the finish and hardware.
• Remove promptly after the wash cycle. Reshape and line dry in the shade; avoid prolonged direct sunlight to prevent uneven fading.
• Avoid tumble drying when possible. If you must tumble dry, use the lowest-heat setting and remove the jacket while slightly damp to finish air drying.
• Iron inside out on low heat; keep the iron away from studs and hardware (use a pressing cloth if needed).
• Spot clean small stains with a damp cloth. For metal studs, gently wipe with a soft, dry cloth—if cleaning agents are used, test on an inconspicuous area first.
• Store on a wide hanger to retain shape and protect studs from snagging; avoid folding and stacking heavy items on top.
• Professional dry cleaning is an option—advise your cleaner about decorative studs.

Style tips

• Weekend casual: White tee, slim black jeans and low‑top sneakers — the studs add instant edge.
• Double denim: Pair with a darker or lighter wash pant for contrast; keep proportions balanced with a slim bottom.
• Feminine contrast: Layer over a floral midi dress and ankle boots to mix soft and tough elements.
• Streetwear layer: Throw over a hoodie or oversized sweatshirt, add joggers and chunky sneakers for a relaxed, modern look.
• Night out: Team with leather trousers or a mini skirt, heeled boots and bold earrings for an elevated, rock‑inspired outfit.
• Festival-ready: Crop top, high‑waisted shorts and layered necklaces—cuff the sleeves to show bracelets.
• Pro tips: Cuff sleeves to showcase bracelets, belt at the waist to create shape, and coordinate one metal accent (bag hardware or boots) with the studs for a cohesive look.