Snobbish PU Leather Biker Jacket with Side Zip Pockets | Charcoal / M 100100716682378

How to measure this jacket

Use a soft measuring tape and a flat surface. For jacket measurements, always zip/button the jacket and smooth out wrinkles before measuring. Record measurements in cm or inches (1 in = 2.54 cm).

Measure the garment (jacket laid flat)

1. Chest / Bust (flat): Measure straight across from one armpit seam to the other, about 1 cm below the armhole. Double that number to get the chest circumference.
2. Shoulder width: Measure from shoulder seam to shoulder seam across the back at the top.
3. Sleeve length: Measure from the shoulder seam to the end of the cuff. For raglan sleeves, measure from the center back of the neck across the shoulder to the cuff.
4. Back length (center back): From the base of the collar (where collar meets fabric) straight down to the hem.
5. Hem width (flat): Measure across the bottom hem seam-to-seam; double for circumference.
6. Pocket openings: Measure the visible zip opening length if you need to check functionality for phone/wallet fit.

Measure your body (to choose the right size)

1. Chest: Wrap the tape around the fullest part of your chest, under the arms and across the shoulder blades. Keep tape level and comfortably snug.
2. Waist: Measure around your natural waistline where you normally wear pants.
3. Hips: Measure around the fullest part of your hips.
4. Sleeve length: From the high point of the shoulder (where the shoulder meets the neck) down to the wrist.
5. Height / Back length preference: Note your height and preferred jacket length (cropped vs. longer) when comparing to garment back length.

Fit tip: Compare your body measurements to the jacket’s flat measurements (doubled where noted). Allow 2–4 cm (≈1 inch) ease for a thin layer; allow 4–8 cm (≈1.5–3 inches) if you plan to wear bulky sweaters underneath. If you are between sizes and prefer layering, choose the larger size.

Materials

• Outer: Premium PU (polyurethane) faux leather — a vegan, durable leather alternative with a smooth, consistent finish and water-resistant surface.
• Lining: Smooth polyester (or polyester blend) lining for comfortable on/off and a clean inner finish.
• Hardware: Metal zippers and fittings for the front and side zip pockets; finishes vary by batch (commonly gunmetal or silver-tone).
• Pocket lining & seams: Textile pocket bags and reinforced stitched seams for everyday use.

Why PU? PU leather gives the look of genuine leather with easier care, lower weight and a consistent colour/texture. It is less breathable than natural leather but is a practical, animal-friendly option.

Note: Always check the sewn care label inside the jacket for exact textile composition and any manufacturer-specific information.

Model information (reference)

Reference styling image: model height ~5'9" (175 cm) wearing a size M. The Snobbish PU Leather Biker Jacket is designed with a classic biker silhouette that sits slightly tailored to the body while allowing room for a thin-to-medium layer underneath. For a looser layered look, consider sizing up.

Care Guide (to keep it lovely longer)

• Regular cleaning: Wipe with a soft, damp cloth to remove dust. For light dirt, use a mild soap diluted in water on a soft cloth, then wipe with clean water and air dry. Do not soak the jacket.
• Spot treatment: Test any cleaner on an inconspicuous area first. For grease or stubborn marks, gently dab (don’t rub) with a mild detergent solution and rinse with a damp cloth.
• Drying: Always air dry in a shaded, well-ventilated area. Avoid direct sunlight or heat sources (radiators, hair dryers) which can cause PU to warp or crack.
• Do not machine wash or tumble dry: PU leather and many linings can be damaged by washing machines, dryers or dry cleaning solvents—follow the garment’s care label.
• Ironing & creases: Do not iron directly. To reduce creases, hang the jacket in a steamy bathroom (not over direct steam) or use a garment steamer at a safe distance. Smooth gently with hands while warm and dry.
• Conditioning & protection: Use products formulated for faux leather sparingly (PU cleaners/conditioners). Avoid oil-based products that can leave stains or degrade the surface. Always patch-test first.
• Storage: Store on a wide, shaped hanger to maintain shoulder shape. Keep in a breathable garment bag if storing long-term; avoid plastic bags that trap moisture. Store away from prolonged sunlight and humid conditions.
• Minor repairs: For loose threads or hardware issues, reinforce stitching or replace hardware promptly. For major damage or deep stains, consult a professional experienced with faux-leather garments.

Style Tips

• Rock-chic: Pair with black skinny jeans, a band tee and ankle boots. Add a layered necklace for edge.
• Casual everyday: Throw over a white tee and straight-leg jeans with sneakers for an easy off-duty look.
• Smart-casual: Wear over a button-down shirt or thin knit with tailored trousers and loafers—the jacket adds tailored attitude to office-friendly separates.
• Feminine contrast: Style with a slip dress or midi skirt and heels for a high-low mix that softens the biker vibe.
• Layered warmth: For cooler days, wear a slim hoodie or lightweight knit underneath—choose one size up if you want bulkier layering.
• Color play: Use bright scarves, printed tees or coloured knitwear to add contrast against the jacket’s finish.
• Accessorize: Sunglasses, a chunky watch or a statement belt work well with the jacket’s structured shape.
• Season tips: In transitional weather, wear with a tee or shirt; in cold weather, layer with a fitted sweater and insulated scarf for warmth without bulk.