Snobbish PU Leather Biker Jacket with Side Zip Pockets | Chocolate / S 100100934751663

Snobbish PU Leather Biker Jacket with Side Zip Pockets

How to measure

Use a soft cloth measuring tape. For garment measurements, lay the jacket flat on a smooth surface, zip it up and smooth out any wrinkles. For body measurements, stand naturally (wear a thin top) and keep the tape parallel to the floor.

Measuring the garment (product)

• Chest (pit-to-pit): Measure across the front from one underarm seam to the other, about 1 cm below the armhole. Double that value to get the full chest circumference.
• Waist: Measure across the narrowest part of the jacket front and double for circumference.
• Hem/Bottom Width: Measure across the bottom edge flat and double.
• Shoulder Width: Measure from shoulder seam to shoulder seam straight across the back.
• Sleeve Length: Measure from the shoulder seam to the end of the cuff.
• Back Length (Center Back): Measure from the base of the collar (where the collar meets the back) straight down to the hem.

Measuring yourself (to choose the right size)

• Chest: Wrap tape around the fullest part of your chest/ bust, under the arms and across the shoulder blades.
• Waist: Measure around the natural waistline (where you normally wear your trousers).
• Sleeve (body measurement): From the center back of your neck, across the shoulder to the wrist with the arm slightly bent — this helps check sleeve length when layered.
• Height: Use your height as reference for overall jacket length.

Fit guidance (allowance)

• Slim fit: Choose a garment that’s about 1–2" (2.5–5 cm) larger than your body measurement.
• Regular fit: 3–4" (7.5–10 cm) of ease for comfort over a T‑shirt or light sweater.
• Layering/oversized: 5" (12+ cm) or more if you plan to wear thick knits underneath.
• If you sit between sizes, opt for the larger size for easier layering and longer wearability.

Materials & construction

• Outer: PU (polyurethane) faux leather — durable, water‑resistant finish that mimics genuine leather while being animal‑friendly.
• Lining: 100% polyester — smooth, lightweight and provides comfortable interior feel.
• Hardware: Metal zippers and snap buttons (gunmetal/antique finish depending on batch) for authentic biker detailing.
• Pockets and trims: Side zip pockets, interior pocket; reinforced stitching at stress points for durability.

PU leather gives a clean, uniform look and is simpler to care for than natural leather, but avoid prolonged exposure to direct heat or sunlight to prevent drying and cracking.

Model information

The model shown in product imagery (for reference):

• Height: 5'10" (178 cm)
• Bust/Chest: 36" (91 cm) • Waist: 27" (69 cm) • Hips: 37" (94 cm)
• Wearing size: M

Use the garment measurements above as the primary reference to choose your size; model info is only a visual reference.

Care Guide (to keep it lovely longer)

1. Daily cleaning: Wipe with a soft cloth dampened with lukewarm water. For light dirt use a drop of mild liquid soap or baby shampoo, then wipe with a clean damp cloth to remove residue. Pat dry with a towel and air dry away from direct heat or sunlight.
2. Spot stains: For grease, sprinkle cornstarch or talc, leave to absorb, then brush off and clean with mild soap. For stubborn marks, test any cleaner on an inconspicuous area first. Avoid harsh solvents and bleach.
3. Avoid machine washing & dry cleaning: Do not machine wash or tumble dry. Many dry cleaners are not equipped for faux leather—consult a cleaner experienced with synthetic leathers if professional care is needed.
4. Wrinkles & creases: Hang the jacket in a steamy bathroom to relax minor creases or use a hand steamer on low, holding several inches away. Do not iron directly on PU leather.
5. Zipper & hardware care: Wipe metal hardware with a soft dry cloth. If a zipper is stiff, apply a small amount of dry zipper lubricant or beeswax; avoid oil-based lubricants that can stain the material.
6. Storage: Hang on a wide, shaped hanger to keep shoulders in shape. Do not fold for long periods. Store in a breathable garment bag (avoid plastic) in a cool, dry place.
7. Long-term maintenance: Use a dedicated faux‑leather conditioner occasionally (follow product instructions). Keep away from perfumes, hair oils and direct sunlight to reduce fading and cracking.

Style tips

• Classic biker: Tee + slim dark jeans + ankle boots. Keep accessories minimal—let the jacket be the focal point.
• Smart casual: Layer over a lightweight knit or turtleneck with tailored trousers and loafers for an elevated, edgy office look.
• Feminine contrast: Pair with a midi dress or skirt and heels for an unexpected, chic juxtaposition of tough and soft.
• Streetwear: Throw over a hoodie, pair with relaxed-fit jeans or joggers and chunky sneakers for urban layering.
• Accessory matching: Coordinate jewelry to the jacket hardware (silver/gunmetal tones work best). Add a thin scarf or leather belt for added detail.
• Seasonal layering: For colder months, layer with a knit sweater or lightweight quilted liner; for spring, wear over breathable tees and shirts.