Plus Size Plaid Snap Down Jacket with Pockets | Black / 1XL 100100235949152

How to measure

To choose the best fit for the Plus Size Plaid Snap Down Jacket, measure yourself and (if possible) a jacket you already own. Use a soft tape measure, stand relaxed, and keep the tape level.

Measure your body

• Bust/Chest — Wrap the tape around the fullest part of your chest, under your arms and across your shoulder blades. Breathe normally; don’t pull the tape tight.
• Waist — Measure the natural waist at the narrowest point of your torso (usually above the belly button).
• Hips — Measure around the fullest part of your hips and seat, keeping the tape parallel to the floor.
• Shoulder width — Measure straight across your back from one shoulder point to the other (where a shoulder seam would sit).
• Sleeve length — Either: (a) from the center back of your neck across the shoulder to the wrist, or (b) from the top of the shoulder (shoulder seam) down to the wrist. Note which method a brand uses.
• Torso / Jacket length — From the highest point of the shoulder (near the base of the neck) down to where you want the jacket hem to land.

Measure a jacket (recommended for best fit)

• Chest (pit to pit) — Lay the jacket flat, fasten snaps, measure across from one underarm seam to the other, then double that number for circumference.
• Shoulder — Measure across the back from seam to seam.
• Sleeve — Measure from the shoulder seam to the end of the cuff (or from center back to cuff if that’s the brand’s method).
• Front length — From the highest shoulder point (near the collar) down to the hem, measured on the front.
• Hem width — Measure the bottom edge from side to side, then double for full circumference.
• Pocket depth — Measure from the pocket opening down to its bottom seam to know what will fit comfortably.

Fit guide: Compare your body measurements to jacket measurements. For layering, allow about 2–4 inches of ease at the bust/chest. If you’re between sizes and plan to wear thick sweaters, size up.

Materials

Material blends can vary by style and production run. Typical construction for a plaid snap-down jacket:

• Outer: brushed flannel or woven plaid — commonly 100% cotton or a cotton/polyester blend (example: 60% cotton / 40% polyester) for softness and structure.
• Lining: 100% polyester or a polyester blend for smooth layering and added warmth.
• Insulation (if applicable): 100% polyester fill for lightweight warmth.
• Trim: metal snaps/buttons, polyester thread, and reinforced stitching at stress points.

Fabric qualities: soft brushed face, comfortable for layering, breathable with good shape retention. If a jacket is water-repellent or insulated, that will be noted on the product label.

Tip: Always check the product label or the technical details section on the product page for the exact fiber content and finishes for this specific item.

About the model

Model example (for reference): Height 5'9" (175 cm) • Bust 42" • Waist 34" • Hips 46" • Wearing size: 1X. The jacket pictured is styled for a relaxed fit with room for light-to-medium layering.

How this fits: The cut is designed to flatter plus-size proportions with a straight, slightly relaxed silhouette. For a more fitted look, consider sizing down one size; for heavier layers, size up.

Care guide (to keep it lovely longer)

• Check the care label first — follow any product-specific instructions.
• Machine wash cold on a gentle cycle with like colors; close snaps and turn the jacket inside out to protect the outer face.
• Use mild detergent; avoid bleach and harsh stain removers unless the label allows them.
• Avoid fabric softeners if the jacket has water-repellent finishes (they can reduce effectiveness).
• Tumble dry low or hang to dry. Remove promptly from dryer to reduce wrinkling; reshape while damp if needed.
• If ironing is required, use a low setting and press with a cloth between iron and fabric to protect the plaid finish and snaps.
• Spot-clean small stains quickly to prevent set-in marks. For stubborn stains or structured trims, consult a professional cleaner.
• Store on a wide hanger in a cool, dry place to keep shape; avoid prolonged direct sunlight to prevent fading.

Style tips

• Casual weekend: layer over a plain white tee, dark straight-leg jeans, and ankle boots for an effortless look.
• Cozy-chic: wear over a lightweight hoodie and leggings; finish with chunky sneakers for sporty layering.
• Dress it up: pair with a fitted knit dress and knee boots — add a slim belt at the waist to create shape and highlight your silhouette.
• Work-ready: combine with a neutral blouse and tapered trousers; choose loafers or low block heels for polish.
• Color pick: pull one color from the plaid pattern (e.g., deep red, navy, or tan) and use it for your top or accessory to create a coordinated outfit.
• Proportions: if the jacket is hip-length, wear with high-waisted bottoms to elongate the leg line; for longer jackets, balance with slim bottoms.
• Accessorize: scarves, beanies, and layered necklaces add personality without competing with the plaid.