Mono B Cross Pleat Flare Pants | Black / L 100100537053717
- Features: Basic style
- Sheer: Opaque
- Material composition: 94% modal, 6% spandex
- Care instructions: Machine wash cold. Tumble dry low.
- Imported
- Product measurements:
S:Waist 25-27 in, Hip 35-37 in
M:Waist 27-30 in, Hip 37-40 in
L:Waist 30-32 in, Hip 40-42 in
How to measure — Mono B Cross Pleat Flare Pants
Use a flexible tape measure and measure the garment laid flat on a table (zipper/button closed) or take body measurements while wearing the underwear/shapewear you plan to use with these pants.
- Waist (garment): Lay the waistband flat. Measure straight across from one side to the other at the top edge of the waistband. Multiply by 2 to get the waistband circumference.
- Hips / Seat (garment): Measure across the fullest part of the seat (usually 7–9 cm / ~3–4 in below the waistband). Multiply by 2 for circumference.
- Front rise: Measure from the top center of the front waistband straight down to the crotch seam.
- Back rise: Measure from the top center of the back waistband straight down to the crotch seam.
- Inseam: Measure along the inside leg from the crotch seam to the bottom of the hem.
- Thigh: Measure straight across the leg 1 inch (2.5 cm) below the crotch seam. Multiply by 2 for circumference.
- Knee: Measure across the leg at the midpoint between crotch and hem (or where the knee falls); multiply by 2.
- Leg opening / Hem: Measure straight across the hem of one leg; multiply by 2 for opening circumference (this shows how wide the flare is at the bottom).
- Total length (optional): From the top of the waistband at the side seam down to the hem along the outside seam.
Notes: For garments with pleats, arrange pleats as they would sit when worn (or flatten them consistently) before measuring so the measurement reflects the finished look. For high-stretch fabrics, measure both relaxed and gently stretched to understand range of fit. To convert flat garment measurements to body fit, allow 1–3" of ease at the hip/waist depending on desired comfort—less ease for a fitted look, more ease for a relaxed fit.
Materials
Check the sewn-in care label or the product detail panel on the site for the exact fabric breakdown. Typical fabric families used for a cross-pleat flare pant are shown below so you know what to expect:
- Ponte or double-knit blends (e.g., rayon/nylon/spandex): Structured, holds shape and pleats well, medium weight, often opaque and wrinkle-resistant.
- Polyester / elastane (stretch crepe): Smooth drape, good recovery, durable and easy-care.
- Rayon/Modal blends with spandex: Very soft, fluid drape for a relaxed pleat and flattering silhouette — may need gentler washing/care.
- Nylon / spandex technical knits: High stretch and recovery, breathable, quick-drying — common for performance-oriented styles.
Properties to expect: moderate-to-high stretch, good recovery to hold pleats, opaque at normal wear, and medium drape to create the desired flare. If the pants have a lining or trims, those components may be different—always rely on the product label for precise fiber content.
Model information
Reference fit shown in imagery: Model height approximately 5'9" (175 cm) wearing a size Small. Example model measurements (for fit reference): bust 33", waist 24", hips 35".
Fit tips: These pants typically sit at the natural or slightly lower waist depending on the cut. If you are between sizes and prefer a sleeker look through the hips/thighs, choose the smaller size; if you want extra room or are carrying weight in the hip area, size up.
Care Guide (to keep it lovely longer)
- Always follow the garment care label first.
- Washing: Machine wash cold on a gentle cycle or hand wash. Turn pants inside out to reduce abrasion on the outer surface and pleats.
- Use mild detergent: Avoid bleach and heavy fabric softeners (they can break down performance fibers and reduce recovery).
- Drying: Air dry flat or hang to dry out of direct sunlight. If using a dryer, tumble low only when the care label permits—air drying preserves shape and pleats best.
- Steaming / Ironing: Use a steamer to revive pleats and remove wrinkles. If ironing is needed, use a low-heat setting and a pressing cloth; press gently to avoid crushing pleats or stretch fibers.
- Storage: Hang by the waistband on a clip hanger or fold along pleat lines. Avoid overcrowding in the closet to prevent unwanted creases.
- Quick fixes: To refresh pleats, hang in a steamy bathroom or use a handheld steamer. Remove pills with a fabric shaver and spot-treat stains promptly with a gentle stain remover.
- Dry clean: Consider professional cleaning if the label recommends it or if the fabric is rayon/modal-heavy and the garment has special construction.
Style Tips
- Balance the silhouette: Pair flared pants with a fitted top, bodysuit, or a tucked-in tee to highlight the waist and keep proportions balanced.
- Dress it up: Add a tailored blazer and heeled sandals or pumps for a polished office or evening look.
- Casual options: A cropped sweater or slim sneaker creates an easy, modern casual outfit.
- Shoe choices: Heels or wedges lengthen the leg and emphasize the flare; platform sandals or ankle boots work well when you want more height without a heel.
- Layering: Short jackets or cropped denim balance the volume of the flare; long coats look elegant when left open to show the streamlined top half.
- Accessories: A waist-defining belt or a long pendant helps create vertical lines and a slimming effect.
- Length advice: Aim for the hem to graze the top of your shoe with flats or just touch the floor with heels—alter hem length if needed for your preferred footwear.
| Type: | |
|---|---|
| Vendor: | |
| Color: |
Black |
| Size: |
S, M, L |
| SKU: |
100100537053717 |
| Weight: |
302 g |
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.