Mittoshop Mineral Wash Elastic Waist Barrel Leg Baggy Pants | Midnight / S 100100683831263

Mittoshop Mineral Wash Elastic Waist Barrel Leg Baggy Pants

How to measure

Use a soft cloth measuring tape. For the most accurate fit, measure a similar pair of pants laid flat (recommended) and compare — or measure your body and allow for the relaxed, baggy cut and elastic waistband.

Measure the garment (flat, recommended)

1. Waist (relaxed): Lay the waistband flat without stretching. Measure straight across the top edge from left to right. Double that number to get the waist circumference. For elastic waistbands also measure the waistband fully stretched to get the maximum circumference (report as relaxed / stretched).
2. Hips: With the pants flat, measure across the fullest part of the seat (usually 15–20 cm / 6–8 in below the waistband). Double that number for the hip circumference.
3. Front rise: Measure from the top of the front waistband down to the crotch seam (where the front and inseam meet).
4. Back rise (optional): From the top of the back waistband to the crotch seam.
5. Inseam: Measure from the crotch seam along the inside leg seam to the bottom hem.
6. Thigh: Measure across the leg, 2 inches (≈5 cm) below the crotch seam; double that measurement for the thigh circumference.
7. Leg opening (hem): Measure straight across the bottom hem and double for circumference.
8. Total length: Measure from the top of the waistband to the hem along the outer side seam.

Measure your body

• Waist: Measure at the natural waist or where you intend the elastic waistband to sit. Keep the tape comfortably snug (one finger’s gap for comfort).
• Hips: Measure around the fullest part of your hips and seat.
• Inseam: Measure from the top of the inner thigh (crotch) down to the floor or the desired hem length while standing in shoes you plan to wear.

Tip: When comparing your body measurements to garment measurements, allow for the baggy cut (extra ease). Typical tolerance from manufacturing: ±1–2 cm.

Conversion: 1 inch = 2.54 cm.

Materials

These pants feature a mineral-wash finish that gives a lived-in, vintage appearance and slight tonal variations — variations are normal and part of the look.

• Typical fabric: midweight mineral-washed cotton or a cotton-rich blend (common blends include cotton with a small percentage of elastane for recovery or polyester for durability).
• Hand and drape: soft, broken-in hand with structured body suitable for a barrel-leg silhouette.
• Construction: elasticized waistband (often with internal or external drawcord), side pockets, and roomy leg shape. No heavy lining — unlined interior.
• Color & finish: mineral wash creates subtle fading, streaking, and irregularities that make each garment unique.

Note: Exact fabric composition (fiber percentages and trim materials) is printed on the garment care label and the product specification — check the product page or the physical label for the precise breakdown.

Model information

Actual model details (replace placeholders with the real values as needed):

• Model name/ID: NaN
• Height: NaN cm / NaN ft
• Wearing size in this product: NaN
• Model measurements (Bust / Waist / Hips): NaN / NaN / NaN

Reference example: Model (example) 175 cm (5'9") — wearing size S; bust 81 cm / waist 61 cm / hips 89 cm. Use the garment measurements above to compare and choose the right size for your preferred fit.

Care Guide (to keep it lovely longer)

• First wash: Wash separately the first time — mineral-washed items can release extra dye.
• Washing: Turn pants inside out. Machine wash cold on a gentle cycle with like colors and a mild detergent. Avoid bleach and harsh detergents.
• Drying: Prefer air drying (lay flat or hang). If you use a dryer, tumble dry low and remove promptly to reduce wear on elastic and prevent overdrying.
• Ironing: If needed, iron on low to medium heat inside out. Avoid direct high heat on elastic areas.
• Spot care: Treat stains promptly with a mild stain remover — test on an inconspicuous area first to avoid affecting the finish.
• Storage: Fold and store flat or on a shelf to avoid stretching the elastic over time. Avoid hanging by the waistband for long periods if the waistband is delicate.
• Extra tips: Turn inside out before washing to protect the mineral-wash finish; avoid fabric softener (it can coat fibers and change hand); avoid chlorine bleach which can damage color and fibers.

Style Tips

• Balance the silhouette: Pair these baggy barrel-leg pants with a fitted or tucked-in top to define the waist — tank, fitted tee, or body suit work great.
• Casual day: White sneakers or chunky trainers + a cropped denim jacket for a relaxed street look.
• Elevated casual: Tuck in a lightweight blouse and add ankle boots or mules; add a slim belt over the waistband to create shape.
• Weekend/off-duty: Oversized sweatshirt or hoodie for an easy, comfortable outfit — cuff the hem once for a cropped effect.
• Seasonal swaps: In warm months, wear with sandals and a linen shirt; in cool months, layer with long coat or structured blazer and ankle boots.
• Accessories: Minimal jewelry and a crossbody bag keep the look modern; use a statement belt or scarf at the waist to add personality.
• Colours & prints: Mineral wash tones pair well with neutrals (white, black, beige), muted earth tones, or bold pops of color if you want contrast.