Leopard Button Up Long Sleeve Jacket | Leopard / S 100100703421884

How to measure

To get the best fit for the Leopard Button Up Long Sleeve Jacket, measure the garment lying flat and compare to your body measurements. Always measure in inches or centimeters and allow the recommended ease below for comfortable layering.

Measure the jacket (garment measurements)

1. Lay flat: Button the jacket and lay it face up on a flat surface smoothing out wrinkles.
2. Chest (bust): Measure straight across the front 1" (2.5 cm) below the armhole from seam to seam. Double this number to get the full chest circumference.
3. Shoulder width: Measure across the back from shoulder seam to shoulder seam (where the sleeve is attached).
4. Sleeve length: Measure from the shoulder seam down to the end of the cuff. (If the jacket has a raglan sleeve, measure from the center back base of the neck along the shoulder to the cuff for total sleeve length.)
5. Back length (center back): Measure from the base of the collar (where collar meets the back) straight down to the hem.
6. Hem width: Measure across the bottom hem from side seam to side seam and double for full hem circumference.
7. Cuff opening: Measure the cuff edge from seam to seam and double to find the circumference.

Example: a flat chest measurement of 20.5" = roughly 41" chest circumference.

Conversion: 1 inch = 2.54 cm. Record both inches and cm if possible.

Measure your body

1. Bust/Chest: Measure around the fullest part of your chest, keeping the tape parallel to the floor.
2. Shoulder: Measure across the back from shoulder bone to shoulder bone.
3. Arm length: With a slight bend at the elbow, measure from the shoulder tip to the wrist.
4. Back length: Measure from the base of the neck (center back) to where you want the jacket hem to sit.
5. Waist & hips: Measure around the natural waist and the fullest part of the hips to check layering clearance.

Recommended ease: For this style, allow about 2–4" (5–10 cm) of extra room across the chest for light layering (t-shirt/long-sleeve). For bulky sweaters, allow 4–6" (10–15 cm).

Materials & fabric details

Typical composition for this style:

• Main fabric: Printed woven polyester (commonly 100% polyester) — lightweight to midweight, soft hand, colorfast print.
• Lining (if present): Polyester lining for smooth on/off and added structure.
• Trims: Resin or molded buttons; polyester thread and seam finishes.

Fabric characteristics: low-to-no stretch, wrinkle-resistant, easy-care, and holds print well. Exact fiber content can vary by batch—please check the sewn-in product label for precise composition if needed (allergies or fabric preferences).

Model information

Reference fit shown on the product images:

• Model height: 5'9" (175 cm)
• Model is wearing: Size S (Small)
• Model measurements (example): Bust ~33–34", Waist ~24–25", Hips ~34–35"

Fit note: The Leopard Button Up Long Sleeve Jacket is designed with a slightly relaxed silhouette. If you plan to layer thick sweaters underneath, consider sizing up one size. Consult the garment measurements above against your body measurements for the best fit.

Care guide (to keep it lovely longer)

1. Read the label: Always follow the sewn-in care label on your jacket first—it has the definitive instructions for that specific piece.
2. Spot clean: Treat small stains promptly with a mild detergent or stain remover and a soft cloth. Test on an inconspicuous area first for colorfastness.
3. Machine wash (if label allows): Turn the jacket inside out, button up, wash cold on a gentle cycle with like colors, and use a mild detergent. Avoid bleach and fabric softeners.
4. Drying: Reshape and hang to dry or lay flat to preserve shape. If tumble drying is allowed, use low heat and remove promptly to avoid wrinkling.
5. Ironing/steaming: Use low heat and iron on the reverse side or use a steamer. Avoid direct contact with printed areas at high temperatures.
6. Professional care: For lined or structured versions, or if in doubt, dry cleaning preserves shape and finish.
7. Storage: Store on a wide hanger to maintain shoulder shape. Keep out of direct sunlight to prevent fading. Use a breathable garment bag for long-term storage.

Quick tips: Wash less often to preserve colors, spot-treat stains, and air garments between wears. Always follow specific garment labels for the best results.

Style tips

Leopard print is a versatile neutral—use it to anchor outfits or add a bold focal point. Here are styling ideas for the Leopard Button Up Long Sleeve Jacket:

• Weekend casual: White tee, high-rise blue jeans, and white sneakers. Wear the jacket open for an easy layered look.
• Office smart-casual: Black turtleneck, tailored black or camel trousers, and loafers or ankle boots. Button the jacket for a polished silhouette.
• Night out: Simple slip dress or fitted black dress, cinch the jacket with a slim belt at the waist, add heels and statement earrings.
• Layering in cooler weather: Lightweight knit or hoodie underneath for street-style edge; top with a long coat when outdoors.
• Mixing prints: Keep other prints small or linear (thin stripes or small checks). Leopard pairs effortlessly with denim, camel, olive, deep red, and black.
• Balance proportions: If the jacket is boxy, pair it with slim bottoms (skinny jeans, tailored pants, pencil skirt) to keep the overall look balanced.
• Accessories: Gold-tone jewelry, a black leather belt, or suede ankle boots elevate the look. For a softer feel, choose neutral accessories (beige, cream, tan).

Styling tip: Treat leopard as a neutral base—introduce one accent color (deep red, olive, or camel) rather than several competing colors for a cohesive outfit.