Inlaid Zircon Double Layered Heart Pendant Necklace | Gold / One Size 100500341751816

100500341751816
$12.05 $0.00( / )
Shipping calculated at checkout.
Pieces: 1-piece Material: 18K gold-plated, Titanium steel, Zircon, Silver-plated Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time. Imported Product measurements: One Size: Chain length 16.5/19.7 in, Extension chain...
  • Gold
  • Silver
  • One Size
Add to Wishlist
  • Pieces: 1-piece
  • Material: 18K gold-plated, Titanium steel, Zircon, Silver-plated
  • Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
  • Imported
  • Product measurements:
    One Size: Chain length 16.5/19.7 in, Extension chain length 2 in, Weight 0.3 oz (9 g)

How to Measure Your Necklace

Use a soft tape measure or a string and a ruler. Measurements below help you confirm fit and layering.

  • Chain length (inner and outer layer):
    • Fasten the clasp, lay the necklace flat, and measure end-to-end including the clasp.
    • Measure each layer separately (inner layer and outer layer). Note any extender length (often 2–5 cm / 1–2 in) and add it for the maximum wearable length.
  • On-body drop (where it sits on you):
    • Wrap a tape around your neck to the point you want the inner heart to sit; that number equals the ideal inner-layer chain length.
    • For a classic double layer, the outer layer is typically 5 cm / 2 in longer than the inner layer.
  • Pendant dimensions:
    • Height: from the top of the bail/loop to the tip of the heart.
    • Width: the widest point of the heart.
    • Thickness: side profile of the pendant.
  • Chain thickness:
    • Measure the diameter in millimeters (mm). Dainty layers are commonly around 1–2 mm.
  • Layer spacing:
    • Measure the vertical distance between the centers of both pendants when worn or laid flat; this shows how staggered the hearts will appear.

Tip: If you own a favorite necklace, measure it and match the inner layer to that length for a familiar fit.

Materials & What They Mean

This piece features inlaid zircon stones in a double-layered heart design. Below is helpful information about common materials used in similar jewelry so you can care for it correctly.

  • Zircon stones (often cubic zirconia, “CZ”):
    • What it is: Many fashion pieces labeled “zircon” use cubic zirconia (lab-grown zirconium dioxide). It offers vivid sparkle and excellent clarity.
    • Durability: Mohs hardness ~8–8.5 (resists everyday scratches but should be stored separately to avoid scuffs).
    • Care: Clean with mild soap, lukewarm water, and a soft brush; avoid harsh abrasives and strong chemicals.
  • Note on natural zircon vs. CZ:
    • Natural zircon (zirconium silicate) is a different mineral (Mohs ~6–7.5) and can be more brittle; avoid ultrasonic cleaners and heat if your piece is confirmed as natural zircon.
  • Common metal bases you may encounter:
    • 925 sterling silver: Bright and precious; may be rhodium plated to slow tarnish. Best cleaned with a silver polishing cloth.
    • Stainless steel (often 316L): Highly corrosion-resistant and color-stable; comfortable for most sensitive skin.
    • Brass/copper alloy: Popular for detailed pendants; always plated. Keep dry to preserve finish.
  • Plating (finish):
    • Gold-tone (yellow/rose) or rhodium-tone finishes add color and shine to the base metal.
    • To extend plating life, minimize exposure to water, sweat, lotions, and alcohol-based sanitizers.
  • Skin sensitivity:
    • If you are nickel-sensitive, stainless steel or sterling silver variants are generally the safest choices.

Model & Fit Notes

  • Typical on-body positions by chain length (may vary by neck size):
    • 14 in / 35 cm: choker fit.
    • 16 in / 40 cm: sits at the collarbone (ideal inner heart layer for most).
    • 18 in / 45 cm: just below the collarbone (common outer layer length).
    • 20–22 in / 50–55 cm: mid-chest.
  • Classic double-layer styling spaces the outer layer about 5 cm / 2 in longer than the inner layer for a clean staggered look.
  • Use the extender to fine-tune where each heart sits based on your neckline.

Care Guide (to keep it lovely longer)

  • Last on, first off: Put the necklace on after makeup, perfume, hairspray, and lotions; remove it before workouts, swimming, or showering.
  • Keep dry: Moisture and chemicals shorten plating life. If it gets wet, pat dry immediately with a soft cloth.
  • Daily wipe: After wearing, gently wipe with a lint-free cloth to remove oils and sweat.
  • Storage: Fasten the clasp and store flat or hang to avoid tangling. Keep in a soft pouch or anti-tarnish bag, away from other jewelry to prevent scratches.
  • Cleaning:
    • For zircon/CZ: Soak briefly in lukewarm water with a drop of mild soap, brush softly, rinse, and dry well.
    • For gold/rhodium plated pieces: Avoid abrasive cloths and chemical dips; use only gentle soap-and-water cleaning.
    • For unplated sterling silver: Use a silver polishing cloth; avoid chemical dips on pieces with stones.
  • Travel tip: Place each layer in a small bag, leaving the clasp outside; this minimizes tangles in transit.

Style Tips

  • Everyday romantic: Let the double hearts shine with a plain tee, open-collar shirt, or crewneck sweater.
  • Dressy minimal: Pair with a slip dress or V-neck blouse; keep earrings simple (studs or huggies) to highlight the pendants.
  • Layer play: Add a short, delicate choker above the inner heart or a longer simple chain below the outer heart for a curated stack.
  • Mix and match: Complement with slim bangles or a tennis bracelet featuring zircon/CZ for coordinated sparkle.
  • Gift-ready: Heart motifs are perfect for anniversaries, birthdays, bridesmaids, or “just because” moments.
Type: 

Necklaces

Vendor: 

Trendsi

Color: 

Gold, Silver

Size: 

One Size

SKU: 

100500341751816

Weight: 

9 g

Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.

If it is a split package order, it will start from the time of the final package delivery date and time.

  • Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
  • Shipping and handling charges are non-refundable. 
  • Return shipping is the customer's responsibility unless it was a shipping error or a damaged item. 
  • Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
  • Hipomarket will email you after return has been processed to confirm what has been done.


Processing time is 5 - 7 business days after we receive the return.

To help expedite the processing of returns, please follow these instructions:

  1. Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
  2. All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
  3. Send return back within 7 business days of this submission to:

Returns Department

17300 Railroad Street, Unit D

City of Industry, CA 91748 

4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.

Once a return is processed, Hipomarket will reach out via email to confirm.