Heart Shape Double-Layered Stainless Steel Necklace | 101300989237185
- Material: Titanium steel, 18K gold-plated
- Care instructions: Avoid wearing during exercise, as sweat will react with the jewelry to produce silver chloride and copper sulfide, which causes the jewelry to deteriorate and corrode over time.
- Imported
- Product measurements:
Chain length: 14.6-16.5 in
Extension chain length: 2 in
Heart Shape Double-Layered Stainless Steel Necklace
A delicate two-tier chain with a heart detail designed for effortless everyday layering.
How to Measure Your Necklace
- Find your ideal length (no necklace needed):
- Wrap a non-stretch string around your neck where you want the inner layer to sit. Mark the meeting point and measure the string against a ruler. Repeat for the outer layer, usually 2 inches (5 cm) longer.
- Common layer pairings: 14/16 in (35/40 cm), 16/18 in (40/45 cm), or 18/20 in (45/50 cm).
- Measure a necklace you own for comparison:
- Lay it flat and measure end-to-end including clasp. For a double chain, measure each layer’s full length individually.
- Drop length: Fold the necklace in half and measure from the center fold to the bottom of the heart charm.
- Measure key details (if you have the item in hand):
- Pendant size: Width and height of the heart (mm or inches).
- Chain thickness: Use a ruler or caliper to note approximate width (e.g., 1.5–3 mm).
- Extender: Measure from the last fixed link to the end of the extender chain (commonly 2 in / 5 cm).
Fit quick guide: 14–16 in sits at the base of the neck/collarbone (choker/princess), 18 in just below collarbone, 20–22 in upper bust. Allow a ±2–5 mm tolerance for manual measurements.
Materials & Finish
- Base: Stainless steel (commonly 304 or 316L grades), chosen for durability and everyday wear.
- Benefits: Highly resistant to rust, corrosion, and tarnish; low maintenance; retains shine with simple cleaning.
- Skin-friendly: Stainless steel is generally hypoallergenic for most wearers. If you have a severe nickel sensitivity, test first or opt for titanium/niobium alternatives.
- Water/sweat friendly: Safe for incidental water exposure; dry thoroughly after contact with water, lotions, or sunscreen.
- Plated versions: If your necklace is gold-toned, it is typically IP/PVD coated over stainless steel for longer-lasting color compared to standard electroplating.
Note: Exact alloy grade and plating type can vary by production lot. If a specific grade (e.g., 316L) is required, please verify on the product label or specifications.
Model & Fit Information
Use the references below to match the look you see in photos to your preferred fit:
- Classic layering: Inner layer at ~16 in, outer layer at ~18 in creates a subtle 2 in stagger around the collarbone.
- For fuller necks or a looser drape: Try 18/20 in or 20/22 in.
- Scale: A small-to-medium heart pendant reads delicate on most frames; larger hearts feel more statement-like. Check the “How to Measure” section to visualize on yourself.
Tip: To replicate the model’s look, set a string to 16 in for the inner tier and 18 in for the outer tier, then check in a mirror. Adjust lengths up or down to suit your neckline and comfort.
Care Guide (to keep it lovely longer)
- Daily care: Wipe after wear with a soft, dry cloth to remove oils, sweat, and sunscreen.
- Water: Stainless steel is water-resistant, but dry well after showers, swimming, or workouts. Prolonged exposure to chlorine/salt can dull finishes over time.
- Chemicals: Avoid direct contact with perfume, hairspray, and household cleaners.
- Storage: Keep in a jewelry pouch or separate compartment to prevent scratches and tangling between layers.
- Cleaning: Use mild soap and lukewarm water; rinse and pat dry. Avoid abrasive polishes or brushing that could affect any plating.
- Travel: Fasten the clasp and place flat or thread through a straw/card to keep the double layers from knotting.
Style Tips
- Necklines: Complements V-neck, scoop, and off-shoulder tops; choose shorter inner length for high necks and slightly longer for low necklines.
- Layer play: Pair with a thin choker above or a longer pendant (22–24 in) below for a three-tier stack.
- Mix metals: Stainless steel works well with both silver and gold tones—feel free to mix for a modern look.
- Everyday to date night: Wear solo for minimal chic, or stack with delicate chains and studs for a romantic look.
- Gifting: The heart motif makes a thoughtful choice for birthdays, anniversaries, and bridal parties.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.