Heart Sequin Dropped Shoulder Jacket | Blush Pink / S 100100591321935

How to measure

Below are simple, reliable ways to measure the jacket itself (laid flat) and how to measure your body so you can pick the best size. Use a soft tape measure, keep the garment flat and smooth, and record measurements in cm and inches (1 in = 2.54 cm).

Measuring the jacket (lay flat)

• Chest (pit-to-pit): Lay the jacket flat and smooth. Measure straight across from one underarm seam to the other (about 1 cm below the armhole). Double that number to get the full chest circumference.
• Back length: Measure from the centre back at the base of the neck (where the collar sits) straight down to the hem.
• Shoulder width: For a dropped-shoulder style, measure across the back from the point where the sleeve seam meets the body on one side to the same point on the other side.
• Sleeve length (outer): Measure from the sleeve seam (where the sleeve meets the body) along the outer edge to the end of the cuff. For an alternative standard measurement, measure from the centre back of the neck, over the shoulder, to the cuff.
• Hem width: Measure straight across the bottom hem from side to side and double that number for the full hem circumference.
• Armhole: Measure flat across the armhole seam from front to back and double for the full armhole circumference.

Measuring your body (to pick the right size)

• Bust / chest: Measure around the fullest part of your chest, keeping the tape horizontal and comfortably snug.
• Shoulder width: Measure from one shoulder point (where your shoulder meets the arm) across the back to the other shoulder point.
• Sleeve length: With your arm slightly bent, measure from the centre back of your neck across the shoulder to your wrist.
• Torso length: Measure from the base of the neck (centre back) down to where you want the jacket hem to sit.

Tip: Round garment measurements to the nearest 0.5 cm (or 1/4 inch). If you’re between sizes and like room for layers, choose the larger size; for a closer fit choose the smaller.

Materials

Heart Sequin Dropped Shoulder Jacket — typical composition and notes to help you understand the fabric and finish.

• Outer fabric (shell): 100% polyester base with sewn-on heart-shaped sequins (sequins commonly made from polyester/acrylic or PVC).
• Embellishment: All-over heart sequins — lightweight plastic-style sequins that create sparkle and structure.
• Lining: 100% polyester (satin-style lining for a smooth feel and easier on/off).
• Trim: Any ribbing or binding is typically a polyester/elastane blend for recovery (check the label for exact fiber content).

Feel & weight: medium-weight jacket — the sequins add structure and slight stiffness to the hand. Sequins are decorative and may reflect light; they may also show slight variation in placement because they are applied by hand or machine.

Note: For allergy or sensitivity concerns (e.g., metal-look finishes), check the garment label for exact composition and any metallic trims.

Model information

For reference, the model shown wearing this jacket has the following measurements and wears the sample size noted below:

• Model height: 177 cm / 5'10"
• Model measurements: Bust 81 cm / 32", Waist 61 cm / 24", Hips 87 cm / 34"
• Wearing size: Small (S) — this jacket has a relaxed, dropped-shoulder fit.

Fit note: The dropped shoulder and sequin embellishment give a relaxed silhouette. To layer bulky knits underneath, consider sizing up; for a neater, closer look you may prefer your usual size or size down depending on personal fit preference.

Care Guide (to keep it lovely longer)

• Prefer professional care: Due to the sequin embellishment, professional dry clean is recommended for first and periodic cleans to protect the sequins and lining.
• Hand wash option: If the care label allows home washing, turn the jacket inside out and hand wash gently in cold water with a mild detergent. Do not soak for long.
• Machine wash caution: Only machine wash if the care label explicitly permits it — use a garment bag, gentle/delicate cycle, cold water and turn inside out. Avoid agitation with rough items.
• Do not tumble dry: Remove excess water by gently pressing between towels; reshape and lay flat to dry away from direct heat and sunlight.
• No direct ironing: Do not iron over sequins. If needed, press the lining side only with a low-heat iron using a pressing cloth, or use a steamer from a safe distance.
• Spot cleaning: Treat small stains promptly by dabbing (not rubbing) with a damp cloth and mild detergent. Test on an inconspicuous area first.
• Storage: Store on a padded hanger or folded with tissue between layers to avoid sequin abrasion. Use a breathable garment bag for long-term storage; avoid plastic covers.
• During wear: Be mindful of bags, belts and jewelry that can catch sequins. Apply perfume, deodorant and cosmetics before dressing to reduce staining or chemical contact with sequins.
• Minor repairs: Keep spare sequins or beads (if provided). Reattach loose sequins with a fine needle and matching thread or take to a professional for repair.

Style Tips

• Make it the statement piece: Keep the rest of the outfit simple — a white tee or slim black top and jeans lets the heart sequins stand out.
• Day to night: Swap sneakers for heels and add a sleek clutch to take the jacket from casual daytime to evening party-ready.
• Mix textures: Pair with soft silk camis, satin slip skirts, or leather trousers to contrast matte and shiny finishes for a modern look.
• Keep accessories minimal: Small studs or a delicate chain work best so the jacket remains the focal point.
• Monochrome base: Neutral or tonal outfits (all-black, cream, navy) help the heart sequins pop without competing colors.
• Date-night vibe: Layer over a slip dress or fitted midi for a romantic, polished silhouette.
• Casual cool: Pair with loose boyfriend jeans and white trainers for an off-duty, elevated look.