Elastic Lock Laces Flat Breathable Athletic | Gray / 35(US4) 100600802221048

How to measure (choose the right length)

There are three simple ways to determine the correct length for your shoes:

1. Measure an existing lace: Remove a current lace and lay it flat. Measure tip‑to‑tip (aglet to aglet). Use that length as your reference for replacement elastic laces.
2. Count eyelet pairs and use the quick formula: - Count the number of eyelet pairs (one pair = one hole on each side of the shoe).
   - Use this guideline: allow about 6–8 cm (2.5–3.5 in) per eyelet pair for low‑cut trainers; allow 8–10 cm (3–4 in) per pair for higher‑cut shoes. Then add 10–20 cm (4–8 in) for the locking toggle and trimming allowance.
   Example: 6 pairs × 6.5 cm ≈ 39 cm + 15 cm allowance ≈ 54 cm total.
3. Measure the shoe lacing path: Use a soft tape and follow the typical lacing route from the inner bottom eyelet across and up to the top eyelet. Multiply that single‑side length by two, then add the 10–20 cm allowance for the toggle/securing.

Approximate length guide (cut‑to‑fit, ranges):

Note: elastic lock laces are often cut‑to‑fit. Always leave a small extra (10–20 cm) to allow for the locking toggle and secure finishing; you can trim and seal the ends after fitting.

Materials & construction

• Lace body: woven flat elastic (typically a polyester outer with an elastic core such as spandex or rubber). This construction gives stretch for easy slip‑on comfort while retaining rebound and shape.
• Locking toggle: low‑profile, durable polymer (common choices: POM, ABS) or lightweight metal on premium variants. Designed to grip without springs and to hold tension securely.
• Tips / aglets: thermally sealed synthetic tips or metal/plastic aglets to prevent fraying and to ease threading through eyelets.
• Breathable knit/flat profile: the flat woven surface encourages airflow across the tongue area and reduces bulk compared with round elastics.

Properties: quick‑dry, water‑resistant surface, low odor retention, and high fatigue resistance when used within recommended stretch limits. Avoid exposing to strong solvents, chlorine bleach or prolonged direct heat which can degrade elastic fibers over time.

About this model — Flat Breathable Athletic

This model is built for active use and everyday convenience:

• Flat, low‑profile elastic for a clean look and reduced pressure points.
• Breathable woven construction that integrates well with athletic shoe tongues.
• Secure, easy‑to‑adjust locking toggle for one‑hand tensioning and quick on/off.
• Cut‑to‑fit design — trim excess and finish tips for a personalized length.
• Ideal for runners, trainers, kids, seniors and anyone who prefers no‑tie convenience.

Compatibility: works with standard punched eyelets and many hook/lace systems. May not fit shoes with extremely narrow lace channels or decorative non‑through eyelets—measure before trimming.

Care guide — keep them looking great longer

1. Remove and hand‑wash if possible: unthread laces and toggle, wash gently in warm water with mild detergent. Use a soft brush for dirt. Rinse thoroughly.
2. Machine washing: place lace sets in a small mesh bag and wash on a gentle/cold cycle. Remove promptly after the cycle.
3. Drying: air‑dry flat or draped over a line away from direct heat or sun. Do not tumble dry — high heat can damage the elastic core.
4. Cleaning toggles: wipe with a damp cloth and mild soap. Ensure no grit is trapped in the locking mechanism—shake out debris and rinse if needed.
5. Avoid harsh chemicals: no bleach, no dry‑cleaning solvents. Prolonged chlorine or strong acids/alkalis shorten elastic life.
6. Trimming & finishing: after trimming excess, lightly melt synthetic ends with a flame for a fraction of a second to fuse fibers (exercise caution), or fit supplied/replacement aglets. Allow to cool fully before use.
7. Storage: store flat in a cool, dry place away from direct sunlight to preserve elasticity.

Style tips & installation notes

• Neat look: thread laces from bottom to top and keep the tails tucked under the tongue for a hidden, streamlined appearance.
• Quick release: slide the toggle up for a snug fit and slide down to loosen for fast removal—ideal for kids, triathletes and daily commuters.
• Color & contrast: use a contrasting color for a bold accent or match the lace to the shoe upper for minimalist style.
• Fit tuning: adjust tension at different rows to balance heel hold versus forefoot comfort—tighten lower pairs slightly more for a secure heel lock.
• High‑top styling: for boots or high‑tops, consider leaving the topmost eyelet free or using a shorter length to avoid excess bulk.
• Accessorize: metal or colored toggles add a premium accent—choose finishes that coordinate with eyelets or shoe hardware.
• Installation quick steps:
  1. Thread lace through the bottom eyelets and follow your preferred lacing pattern up the shoe.
  2. Slide toggle onto both lace ends, pull to adjust even tension.
  3. Trim excess lace leaving ~2–3 cm beyond the toggle, then finish the cut end (melt or fit aglet).
  4. Tuck any remaining tail under the tongue or into the shoe for a clean finish.