Drawstring Pocketed Plaid Hooded Jacket | Dark Green / S 100100006961268

Drawstring Pocketed Plaid Hooded Jacket

How to measure this jacket

Tools: soft measuring tape, flat surface (table or floor), pen and paper. Measure the jacket laid flat and relaxed — do not stretch the fabric. Record measurements in inches and centimeters (1 in = 2.54 cm). For flat measurements, double the "flat" value where noted to get a full circumference.

1. Lay the jacket flat: Zip/button up, smooth wrinkles and seams but don't pull fabric taut.
2. Chest / Bust (flat → circumference): Measure 1" (2.5 cm) below the armholes from seam to seam. Double that number for full circumference.
3. Shoulder width: Measure across the back from shoulder seam to shoulder seam.
4. Sleeve length (shoulder seam): From the shoulder seam to the end of the cuff.
5. Sleeve length (center back): From the center back neck (base of collar) across shoulder to cuff — gives total sleeve length as worn.
6. Front length: From the high point of shoulder at the neckline (where shoulder meets collar) down to the hem at the front.
7. Back length: From the center back of the neckline to the hem.
8. Hem width (flat → circumference): Measure across the bottom hem from seam to seam. Double for full circumference.
9. Hood depth: From the point where the hood meets the neckline (base) to the highest point of the hood (center crown).
10. Hood opening width: Measure across the front opening of the hood from edge to edge (flat). Double to estimate the opening circumference.
11. Pocket mouth & depth: Measure the pocket opening width (seam to seam) and depth from top opening down to pocket bottom.
12. Center-front closure length: Measure along the zipper or button line from neckline to hem.

Materials & fabric details

This plaid hooded jacket is typically made from one of the following combinations. Always check the garment label for the exact fiber content and trim details.

• Outer fabric (common): Brushed cotton flannel (100% cotton) — soft, breathable, natural warmth; may soften and shrink slightly on first wash. Alternatively, a cotton/polyester blend or polyester flannel for increased durability and less shrinkage.
• Lining / insulation: Lightweight polyester fleece or quilted polyester — adds warmth without bulk and dries quickly.
• Trim & hardware: Cotton/nylon drawstring, metal or plastic toggles, metal zipper or snap closures, stitched patch pockets. Leather or faux-leather accents may appear on some styles.
• Finishes: Some versions may have a water-repellent or soil-resistant finish — check care label for special cleaning instructions.

Model information (for reference)

Model details to help visualize fit:

• Model height: 5'9" (175 cm)
• Model measurements (example): Bust 33" (84 cm) • Waist 25" (64 cm) • Hips 35" (89 cm)
• Wearing size: Small — shows a standard/true-to-size fit. If you plan to layer heavy sweaters under the jacket, consider sizing up one.

Care Guide (to keep it lovely longer)

• Always follow the care label on your jacket first — manufacturer instructions take precedence.
• Before washing: empty pockets, fasten zippers/snaps, and tie drawstrings so they don’t tangle.
• Turn the jacket inside out to protect the outer fabric and hardware.
• Machine wash cold on a gentle cycle with like colors; use a mild detergent. Avoid bleach and fabric softeners (they can degrade finishes and reduce breathability).
• For jackets with trims or water-repellent finishes: if the label says "dry clean only," follow it. For water-repellent finishes, avoid high-heat drying; reproof with a spray if water no longer beads.
• Drying: air-dry on a hanger or lay flat. If tumble drying, use low heat and remove promptly. Reshape the jacket while damp to keep hems and seams straight.
• Iron on low–medium heat if needed (use a pressing cloth for delicate finishes). Avoid ironing directly on trims and toggles.
• To remove pills or fuzz, use a fabric shaver or pill comb gently.
• Spot-clean stains promptly with a mild detergent; for oil-based stains, pretreat with a small amount of dish soap before washing.
• Storage: hang on a breathable hanger in a cool, dry place. Avoid plastic bags for long-term storage — use a cotton garment bag if needed.

Style tips

• Keep the rest of the outfit simple: the plaid is a statement, so pair with solids — black, white, navy, olive or denim create balanced looks.
• Casual weekend: plain tee, slim jeans, and white sneakers. Leave the jacket open for a relaxed silhouette.
• Layering: wear over a lightweight hoodie or thin knit for cozy fall days; if layering thicker knits, consider sizing up for mobility.
• Smart-casual: pair with chinos and desert boots, leave the jacket open and roll the cuffs once to show a neat cuff from the inner layer.
• Streetwear: pair with tapered joggers, high-top sneakers, and a beanie; cinch the drawstring for a more tailored look at the waist.
• Accessorize: neutral scarves and simple hats work best — avoid competing patterns that clash with the plaid.
• Fit tip: if you want a boxier, layered look, size up. For a sleeker silhouette, choose your regular size and cinch the drawstring to define the waist.

Note: If you need exact garment measurements for listing or fit assistance, use the measuring steps above on the actual jacket or measure a similar jacket that fits you well and compare.