Black Faux Leather Double Zip Hooded Long Sleeve Jacket Black / S

Coalition LA Double Zip Hooded Long Sleeve Jacket

How to measure this jacket

Measuring the product (flat on a table)

1. Zip the jacket closed and lay it flat on a smooth surface, smoothing out wrinkles but not stretching the fabric.
2. Chest (body width): Measure straight across the jacket, 1" (2.5 cm) below the armhole from seam to seam. Double that number for the full chest circumference.
3. Shoulder width: Measure from shoulder seam to shoulder seam across the back.
4. Body length: Measure from the highest shoulder point (where the shoulder seam meets the collar) straight down to the hem.
5. Sleeve length (method A): Measure from the shoulder seam to the end of the cuff. (method B — for a more typical fit reference) Measure from center back neck to end of sleeve along the shoulder and outer arm.
6. Hem width: Measure straight across the bottom hem, seam to seam.
7. Hood depth: Fold the hood flat and measure from the front edge to the center back seam.
8. Cuff / sleeve opening: Measure the cuff width flat; multiply by 2 for circumference.
9. Record each value in both inches and centimeters. If you use a string, mark and then measure the string with a ruler or tape.

Measuring yourself for best fit

1. Chest/Bust: Measure around the fullest part of your chest, keeping the tape parallel to the floor.
2. Shoulders: Measure from the outer edge of one shoulder to the outer edge of the other across the back.
3. Sleeve length: With your arm relaxed at your side, measure from the center back of your neck across the shoulder to your wrist (or from shoulder tip to wrist).
4. Torso length preference: If you like to layer, add 1–2" (2.5–5 cm) of ease to chest and body length measurements.
5. Compare your body measurements to the product (flat) measurements and allow 1.5–4" (4–10 cm) of ease in the chest for a comfortably layered fit depending on desired looseness.

Materials & hardware

Exact fabric and trim details may vary by color and production run—always check the garment tag or product page for precise composition. Typical construction for a double-zip hooded jacket from Coalition LA includes:

• Main body: Mid- to heavyweight knit — commonly cotton French terry or a cotton/polyester brushed fleece for softness and structure.
• Ribbing: Cuffs and hem are often cotton blends with added elastane (spandex) for recovery.
• Hood lining: Same as body or a slightly softer knit/brushed interior for comfort.
• Zippers: Two-way (double) front zipper hardware — often metal or quality coil zippers; typically YKK or equivalent.
• Drawcords & trims: Cotton or cotton/poly drawcords with metal or finished plastic aglets; metal eyelets or reinforced stitching at openings.
• Finish: Could include stonewash, pigment dye, enzyme wash, or garment-dye finishes—these affect color variation and care.

Note: If the jacket includes special trims (leather, suede, coated fabrics, or waterproof finishes), follow the specific care instructions on the label for those components.

About the model

Below is a clear, copy-ready example you can use or replace with your actual model details:

• Model A: Height 6'1" (185 cm) — Chest 38" (96.5 cm) — Wearing size: M — Fit: true-to-size, slightly relaxed.
• Model B (alternative): Height 5'9" (175 cm) — Bust 34" (86 cm) — Wearing size: S — Fit: standard with room for a light layer underneath.

When publishing model info, include height, primary measurements (chest/bust, waist), the size worn, and a short note about how that size fits (true to size / oversized / slim). This helps customers choose the right size quickly.

Care guide — keep it lovely longer

• Before washing: Close both zippers, empty pockets, fasten any snaps, and turn the jacket inside out to protect the exterior and hardware.
• Washing: Machine wash cold on a gentle cycle with like colors using a mild detergent. Avoid chlorine bleach.
• Delicate hardware: For heavy hardware or if you prefer extra protection, place the jacket in a laundry bag or pillowcase to reduce abrasion.
• Drying: Hang to dry or lay flat to dry to preserve shape. If tumble drying is necessary, use low heat and remove promptly to avoid over-drying and shrinkage.
• Ironing: If needed, iron on low heat on the reverse side and avoid direct heat on zippers, prints, or trims. Use a pressing cloth for delicate finishes.
• Fabric softener & treatments: Avoid fabric softener if the garment has moisture-wicking or water-repellent finishes. Spot-test any treatment first.
• Stain removal: Treat stains promptly with a gentle stain remover; test on an inconspicuous area first. For dye-transfer or stubborn stains, consult a professional cleaner.
• Pilling: Remove pills with a fabric shaver or sweater comb, following the tool instructions and working gently.
• Storage: Store on a shaped hanger for structure or folded in a breathable bag. Keep out of prolonged direct sunlight and away from damp environments to prevent fading and mildew.
• Special trims: For leather, suede, or coated areas, follow specialist care instructions—do not machine wash these components.

Style tips

• Casual everyday: Wear zipped up with slim denim and clean low-top sneakers for a streamlined, modern look. Use the double zip to open the bottom slightly for comfort when sitting.
• Layering for cooler weather: Throw it over a thin knit or flannel shirt, and top with a long coat if needed. The hood works as a casual cap alternative in light rain or wind.
• Smart-casual: Pair with tapered chinos and leather boots; keep the jacket zipped partway and leave the hood down for a cleaner silhouette.
• Athleisure / travel: Combine with joggers and performance sneakers — the double-zip and secure pockets make it practical and comfortable on the go.
• Color pairing: Neutral colors (black, navy, grey) pair well with bold accent colors (olive, rust, burgundy). For brighter jacket colors, balance with muted trousers or denim.
• Fit styling: For a roomy, layered look size up one; to keep a slimmer profile choose your usual size or size down (depending on listed fit). Check model info to judge fit.
• Accessorize: Add a beanie or baseball cap for streetwear vibe, or a slim scarf and watch for a refined finish. Minimal hardware and clean lines keep the jacket versatile.
• Using the double zip: Unzip the bottom slightly when seated for ease, or open the top zip a bit to reveal a shirt underneath—this gives functional ventilation and styling options.

If you need exact fiber contents, hardware specs, or the specific measurements of the unit you’re viewing, please check the garment tag or the product details section on the product page for the most accurate, up-to-date information.