Buttoned Striped Collared Neck Jacket | Caramel / S 100100487547994

Buttoned Striped Collared Neck Jacket

How to measure

Use these two quick methods depending on whether you are measuring your body for sizing or measuring a jacket you already own to compare fits.

Measure a garment (recommended when possible)

Lay the jacket flat on a smooth surface and smooth out wrinkles without stretching the fabric. Measure in centimetres (cm) or inches (in).

• Chest / Bust — Measure across the front from one underarm seam to the other (about 2–3 cm below the armhole). Double that number for the full circumference.
• Shoulder width — Measure across the back from shoulder seam to shoulder seam.
• Sleeve length — From the shoulder seam to the end of the cuff. For overall sleeve length you can also measure from the center back of the neck to the wrist.
• Back length — From the high point of shoulder (HPS, where the shoulder meets the base of the collar) straight down to the hem.
• Hem / Hip — Measure across the bottom edge and double for circumference.
• Neck / Collar — Measure the base of the collar across (double if you need full circumference) or measure the collar height from base seam to top edge.

Tip: Compare these garment measurements to a jacket you already own. Allow extra ease depending on desired fit (see quick guide below). Conversion: 1 in = 2.54 cm.

• Fitted: ~2–4 cm (1 in) of ease at bust
• Regular: ~6–10 cm (2.5–4 in) of ease
• Oversized: 12 cm (5 in) or more

Measure your body

• Bust / Chest — Measure around the fullest part of your bust/chest while wearing a light top; keep the tape level.
• Waist — Measure around the natural waistline (narrowest part) or where you normally wear the jacket waist.
• Hips — Measure around the fullest part of your hips.
• Arm length — With arm relaxed by your side, measure from the shoulder point down to the wrist.

Match your body measurements to the garment measurements above and choose a size that allows the ease you prefer.

Materials

If exact fiber content isn’t shown here, check the product label or the product specification on the page for the certified composition. The Buttoned Striped Collared Neck Jacket is typically constructed with a soft structured shell and a smooth lining; common materials and what to expect:

• Cotton or cotton blends — breathable, comfortable, natural feel; may shrink slightly if washed hot.
• Synthetic blends (polyester, acrylic, viscose mixes) — good shape retention, less prone to wrinkling, easy care; some blends are warmer and more durable.
• Lining (when present) — often polyester or viscose for a smooth inside making the jacket easy to slip on.
• Buttons & trims — typically plastic/resin or metal; trims can affect care (metal may require drying thoroughly to avoid tarnish).
• Stripe construction: yarn-dyed stripes tend to be more colorfast; printed stripes may be lighter-weight and can fade faster over time.

Note: Exact percentages and care requirements depend on the actual fabric composition printed on the garment label.

About the model

Example model information used for the product photos (replace with actual on-site details if available):

• Model height: 178 cm (5'10")
• Wearing size: S
• Fit shown: Regular / slightly relaxed — intended to allow light layering underneath

If you prefer a closer fit, consider ordering one size down; if you plan to layer thicker sweaters, consider one size up.

Care guide (to keep it lovely longer)

Follow the jacket’s care label first. Below are general recommendations to preserve shape, color and finish.

• Washing — Machine wash cold on a gentle/delicate cycle or hand wash in cold water. Turn the jacket inside out and fasten buttons before washing.
• Detergent — Use a mild liquid detergent; avoid bleach and strong stain removers unless the label allows them.
• Drying — Reshape and lay flat to dry on a clean towel away from direct heat and sunlight. Avoid hanging wet knit jackets (they can stretch).
• Tumble drying — Generally not recommended. If you must, tumble on the lowest heat and remove while still slightly damp to finish drying flat.
• Ironing & steaming — Use a low heat setting; iron inside out or use a cloth between iron and fabric. A steamer is great for removing creases without pressing down the texture.
• Pilling — Remove pills gently with a fabric shaver or sweater comb. Do not pull pills by hand.
• Storage — Fold knit jackets to avoid shoulder distortion; store in a cool, dry place. For long-term storage, use breathable garment bags and avoid plastic.
• Spot cleaning — Blot stains immediately with a damp cloth; pre-treat gently and test inside hem first for colorfastness.
• Dry cleaning — If the label specifies "Dry Clean Only" (often for wool blends or delicate linings), follow that guidance to avoid damage.

Style tips

• Casual daytime — Layer the jacket over a white tee and slim jeans; finish with white sneakers or loafers for an easy, polished look.
• Smart / office — Wear over a fitted blouse or fine-gauge knit and tailored trousers; tuck the front slightly or add a thin belt to define the waist.
• Evening / elevated — Pair with a slip dress or leather-look trousers and ankle boots; choose subtle gold jewelry to complement the stripe details.
• Play with scale — If the jacket has narrow stripes, pair with a larger-check or solid bottom for balance; if stripes are wide, keep other patterns small or neutral.
• Layering — Collar + coat: the collared neckline works well under longer coats; wear a fitted turtleneck underneath on colder days for extra warmth.
• Accessorising — Use one color from the stripe as an accent (bag, scarf or shoe) to create a cohesive look without overpowering the pattern.
• Buttoning — Button up for a preppy, structured silhouette; leave a couple of top buttons open or layer a tee under for a relaxed vibe.

Questions about exact fabric composition, full garment measurements or model specifics? Please check the product label details shown on this page or contact customer support for the precise specifications.