18K Gold Plated Layered Chain Necklace | 100100188443667
- Picture style: Flat lay
- Style: Fashion, vintage
- Appearance: This elegant chain features a sophisticated design, offering a classic yet contemporary aesthetic.
- Material: Crafted from durable stainless steel, this piece is enhanced with a luxurious 18k gold-plated finish, providing both resilience and a radiant gleam.
- Craft: Each item undergoes an meticulous 18k gold plating process, ensuring a high-quality, long-lasting finish that resists tarnishing.
- Care: To maintain the pristine condition of your jewelry, it is recommended to avoid wearing it during exercise. Sweat can react with the metal, potentially leading to the formation of silver chloride and copper sulfide, which may affect the luster and appearance of the piece.
- Imported
- Product measurements:
Chain length: 16 inches, with an additional 17-inch chain, offering versatile styling options for various necklines and preferences.
Extension chain length: Each chain includes a generous 2-inch extension, allowing for adjustable wear and a customized fit. This thoughtful design ensures comfort and adaptability.
Weight: At a lightweight 0.5 oz (13.4 g), this piece provides a comfortable wearing experience without sacrificing its substantial visual appeal. The delicate balance of the 18k gold plated design makes it ideal for everyday wear or special occasions.
How to Measure Your Layered Necklace
Use these quick steps to choose the right lengths and check fit for the 18K Gold Plated Layered Chain Necklace.
- Measure your neck: Wrap a flexible tape (or string, then measure the string) around the base of your neck. Note the measurement in inches or centimeters.
- Pick your layer lengths: For a classic three‑layer look, add about 2 inches (5 cm) between each layer.
- Layer 1 (choker/collarbone): neck measurement + 1–2 in (2.5–5 cm)
- Layer 2 (collarbone): Layer 1 + 2 in (5 cm)
- Layer 3 (just below collarbone): Layer 2 + 2 in (5 cm)
- Check total length: Lay the necklace flat and measure end‑to‑end including the clasp. If there’s an extender, note the minimum length (without extender) and maximum length (with extender fully used).
- Measure chain thickness (optional): Place the chain against a ruler with millimeters. Typical delicate layers are about 1–3 mm; statement chains may be 4–7 mm.
- If there’s a drop or pendant: Measure the vertical drop from the center point of the necklace to the end of the pendant or Y‑drop to understand where it lands on your neckline.
Quick length guide: 14–16 in (35–40 cm) choker, 16–18 in (40–45 cm) collarbone, 18–20 in (45–50 cm) princess, 20–24 in (50–61 cm) matinee.
Materials & Composition
This piece is designed to give a luminous, long‑lasting gold look while remaining lightweight and comfortable for daily wear.
- Gold Plating
- 18K gold plating for a warm yellow tone (18 karat gold is 75% pure gold in alloy). Typical fashion jewelry plating ranges around 0.5–2.5 microns depending on process; thicker plating generally offers longer wear.
- Base Metal
- Common bases for 18K gold plated jewelry are high‑grade stainless steel (often 304/316L) or brass. Stainless steel bases paired with PVD plating tend to be more abrasion‑resistant; brass bases typically use electroplating. Exact base may vary by batch—refer to product specs if listed.
- Finish & Process
- PVD or electroplated finish for enhanced color and sheen. Smooth, polished links minimize snagging and help reduce premature wear from friction between layers.
- Sensitivity
- Most modern platings are nickel‑safe, but sensitivities vary. If you have metal allergies, confirm the base metal and plating process in the full product details.
Note: All gold plating is subject to natural wear over time, especially on high‑contact areas like clasps and edges. Lifespan is strongly influenced by care and exposure to moisture, lotions, and friction.
Model Information & On‑Model Fit Guide
For a layered look similar to typical on‑model images, aim for approximately:
- Layer 1: 15–16 in (38–41 cm) — sits at the base of the neck
- Layer 2: 17–18 in (43–46 cm) — rests on the collarbone
- Layer 3: 19–20 in (48–51 cm) — sits just below the collarbone
Fit can vary by neck circumference. If your neck measures ~12.5–13.5 in (32–34 cm), the above lengths will create gentle tiering with ~2 in (5 cm) of spacing. Size up 1–2 in (2.5–5 cm) for broader necks or higher necklines. If your necklace includes an extender, start on the shortest loop and adjust in small increments to fine‑tune where each layer lands.
Care Guide — Keep It Lovely Longer
- Last on, first off: Put your necklace on after skincare, perfume, and hairspray. Remove it before cleansing or bedtime.
- Avoid water and sweat: Take off before showering, swimming, or workouts to reduce moisture and salt exposure.
- Keep it dry and clean: After wearing, gently wipe with a soft, lint‑free cloth to remove oils and perspiration.
- Store smart: Keep in a dry pouch or box, ideally in separate compartments to minimize friction between layers and other jewelry.
- Avoid chemicals: Keep away from chlorine, household cleaners, and jewelry dips that can strip plating.
- Travel tip: Use individual pouches or wrap each layer to prevent tangling and surface rubbing.
- Refresh over time: If wear becomes visible, professional replating can restore the finish.
Style Tips
- Everyday polish: Wear the shortest layer with a crew‑neck tee and let the longer layers frame the collarbone for effortless shine.
- Neckline matching:
- V‑neck or wrap: Position the longest layer to mirror the V for a flattering line.
- Button‑down: Leave two top buttons open and let the middle layer sit at the collarbone.
- Turtleneck: Use all layers over the knit for a chic, elevated statement.
- Mix textures: Combine a sleek herringbone with a paperclip or cable chain for depth without bulk.
- Coordinate metals: 18K gold plating pairs beautifully with warm neutrals; mix with delicate gold hoops or a slim cuff bracelet.
- Balance the look: If you’re wearing bold earrings, keep the chain layers minimal; if your necklace is the hero, choose understated studs.
- Personalize: Add a small pendant or charm to the middle layer to create a focal point without overwhelming the set.
Return requests must be initiated within 7 days (the first day of the return window starts the day tracking shows delivered status) of receiving all items in the order and shipped back to us within 7 days of submission to qualify for a full refund.
If it is a split package order, it will start from the time of the final package delivery date and time.
- Orders returned without meeting the above criteria are subject to a 20% restocking fee or we may decline the entire return.
- Shipping and handling charges are non-refundable.
- Return shipping is the customer's responsibility unless it was a shipping error or a damaged item.
- Please allow Hipomarket 5 - 7 business days from the day we receive the returned package to process.
- Hipomarket will email you after return has been processed to confirm what has been done.
Processing time is 5 - 7 business days after we receive the return.
To help expedite the processing of returns, please follow these instructions:
- Return auth number must be included with the return. (This can be found under Orders -> Return on the site).
- All items returned must be new, unworn, and in original clear garment bag with SKU sticker and tags.
- Send return back within 7 business days of this submission to:
Returns Department
17300 Railroad Street, Unit D
City of Industry, CA 91748
4. Please note, the return may be subject to a 20% restocking fee or declined if the above criteria are not met.
Once a return is processed, Hipomarket will reach out via email to confirm.